12x7.7 UV Exposure Unit
ASC 12X7.7 exposure unit is an equipment used for small area exposure, especially suitable for exposure of small size plates.
Application:
PCB's Hot Foil Polymer Plates
Letterpress Polymer Plates
Pad Printing Plates (Clichés)
Sandblasting Stencils
Glass etching Stencils
'Rubber Stamps'
Main features

  • Digital Auto-Off timer with Auto-Repetition

  • 4 UV fluorescent tubes

  • 12"x7.7" exposure capacity

  • Heavy duty extruded steel frame

  • User-friendly desktop design with long-term life span

Parameters

  • Exposing area: 12"x7.7"(310x200mm)

  • Voltage: 220v

  • Light power: 72W（four 18W UV fluorescent bulbs )

  • Time Range: 0-999 seconds

  • Machine size: 19.7"x11"x6.3"(500x280x160mm)

  • Package dimensions: 22.4"x13"x8.9"(568x333x225mm)

  • Net weight: 15.4Lb(7kg)

  • Shipping weight: 24.5Lb(11kg)

　

Press “SET” key, the last indicator of meter shows “S” shining. Press “+” or “-” to set time.After setting time, press “set”again, then “S” stops shining. Then RUN it.

The green button, which has the same function as the "RUN" key, but has even much longer life. As the machine has automatic memory function,when use it next time, you just need to press this green key .It will work as the original setting.

Adopt 6mm high-strength toughened glass board, high compressive strength. The surface is not easy to scratch. Once the glass is broken, it will turn into mosaic fractured state having no sharp edge to insure safety of users.

The machine adopts all-metal construction, advanced electrostatic painting inside and outside of the case. With elegant appearance, it is convenient to clean and never rust.

12x7.7 UV Exposure Unit
ASC 12X7.7 exposure unit is an equipment used for small area exposure, especially suitable for exposure of small size plates.
Application:
PCB's Hot Foil Polymer Plates
Letterpress Polymer Plates
Pad Printing Plates (Clichés)
Sandblasting Stencils
Glass etching Stencils
'Rubber Stamps'
Main features

  • Digital Auto-Off timer with Auto-Repetition

  • 4 UV fluorescent tubes

  • 12"x7.7" exposure capacity

  • Heavy duty extruded steel frame

  • User-friendly desktop design with long-term life span

Parameters

  • Exposing area: 12"x7.7"(310x200mm)

  • Voltage: 220v

  • Light power: 72W（four 18W UV fluorescent bulbs )

  • Time Range: 0-999 seconds

  • Machine size: 19.7"x11"x6.3"(500x280x160mm)

  • Package dimensions: 22.4"x13"x8.9"(568x333x225mm)

  • Net weight: 15.4Lb(7kg)

  • Shipping weight: 24.5Lb(11kg)

　

Press “SET” key, the last indicator of meter shows “S” shining. Press “+” or “-” to set time.After setting time, press “set”again, then “S” stops shining. Then RUN it.

The green button, which has the same function as the "RUN" key, but has even much longer life. As the machine has automatic memory function,when use it next time, you just need to press this green key .It will work as the original setting.

Adopt 6mm high-strength toughened glass board, high compressive strength. The surface is not easy to scratch. Once the glass is broken, it will turn into mosaic fractured state having no sharp edge to insure safety of users.

The machine adopts all-metal construction, advanced electrostatic painting inside and outside of the case. With elegant appearance, it is convenient to clean and never rust.
Item Include:1 Set of 220V 72W Electric 12"x7.7" UV Exposure Unit for Pad/Screen Printing,Hot Stamping 010003