|
D3040-12 layer stainless steel plate special drying box for drying powder liquid(110V) |
|||||||||||||
| This is a 12-story table top
and push dryer. Suitable for various industries, can be heated fast
drying, but also natural drying.
|
|||||||||||||
| Introduction: | |||||||||||||
|
●The utility model is mainly used for drying and storing various products to save space and improve efficiency. ●The 12-layer drying rack is mainly composed of chassis, net frame and hot air blower, which is easy to operate and install. ●Equipped with 1200W fan 1, fully enclosed environment, machine heating to 70 degrees, the machine automatically stop heating to ensure safety. ●The user can change the number of layers and the height of each layer as needed. The frame has 12 layers. If you need to place the height of more than 3 cm, less than 6 cm of products, you can remove some of the stainless steel plate. |
|||||||||||||
 |
Parameters:
Manual measurement, there may be errors, to the actual measurement shall prevail.
|
||||||||||||
| Details: | |||||||||||||
| The top of the machine radiates heat, and the radiating hole can be adjusted according to the need. | |||||||||||||
   |
|||||||||||||
| Up and down the installation of magnets, machine door can be fixed adsorption. | |||||||||||||
 |
|||||||||||||
| Two side mounted handles for easy movement. | |||||||||||||
 |
|||||||||||||
| With 12 stainless steel plates.
|
|||||||||||||
|
Use and maintain ●Before each use, check the hot air fan and grid frame, check the installation screw, if loose, please tighten in time. ●After using, clean the grid frame, avoid material accumulation and blockage, affect the use effect. ●Check every part of the machine regularly. ●To prevent overload, in the use of the process, pay attention to safety. |
|||||||||||||
 |
|||||||||||||
|
Item Number:
D3040-12 layer stainless steel plate special drying
box for drying powder liquid(110V)--010518
|
|||||||||||||
|
You can make order
with no worry. |
|||||||||||||
