|
D4060-12 desktop placed push type heavy weight drying rack with dryer(110V) |
|||||||||||||
| This is a 12-layer table top
with a dryer.Applicable to a variety of industries, can be heated
fast drying, but also natural drying.
|
|||||||||||||
| Introduction: | |||||||||||||
|
●The utility model is mainly used for drying and stacking various products, which saves space and improves efficiency. ●The 12-layer drying rack is mainly composed of a box body, a net rack and a hot air blower, which is easy to operate and install. ●Equipped with 1200W fan 2, fully enclosed environment, the machine heated to 70 degrees, the machine automatically stop heating, to ensure safety. ●The user can change the number of layers and the height of each layer as needed. The frame has 12 layers. If you need to place products with a height of more than 3 cm and less than 6cm, you can remove some layers and connect the plastic pads with screws, and the frame can accommodate thicker objects. |
|||||||||||||
 |
Parameters:
Manual measurement, there may be errors, to the actual measurement shall prevail.
|
||||||||||||
| Details: | |||||||||||||
| The top of the machine radiates heat, and the radiating hole can be adjusted according to the need. | |||||||||||||
 
 |
|||||||||||||
| Up and down the installation of magnets, machine door can be fixed adsorption. | |||||||||||||
 |
|||||||||||||
| Two side mounted handles for easy movement. | |||||||||||||
 |
|||||||||||||
|
Use and maintain ●Before each use, check the hot air fan and grid frame, check the installation screw, if loose, please tighten in time. ●After using, clean the grid frame, avoid material accumulation and blockage, affect the use effect. ●Check every part of the machine regularly. ●To prevent overload, in the use of the process, pay attention to safety. |
|||||||||||||
 |
|||||||||||||
|
Item Number:
D4060-12
desktop placed push type heavy weight drying rack with
dryer(110V)--010525
|
|||||||||||||
|
You can make order
with no worry. |
|||||||||||||
