新建网页 1

48 inch alloy metal wrench

Introduction

Around the pipe turns it to complete the connection. Its working principle is to change the force of the clamp into the torque, with the force in the direction of the twist is even more tight.

Attention

(1) To select the appropriate specifications;
(2) The opening of the clamp head is equal to the diameter of the workpiece;
(3) The clamp head should clamp the work piece and then force it to prevent slipping;
(4) With the boosting rod, the length should be appropriate. Move the handle, note bearing torque, not excessive force, to prevent overload damage;
(5) To keep the teeth and the adjusting ring clean;
(6) It generally cannot be used as a pipe wrench hammer;
(7) The workpiece can not hold temperature more than 300 degrees celsius

Working principle

Automatically adapt to different diameters, to automatically adapt to the jaw stress caused by plastic deformation in this reduced diameter effect, ensure the torque, no slippage.

Item Include：
1) 1 Pc of 48'' alloy metal wrench

Item included:

48 inch alloy metal wrench (020010)

	Item##	Description	QTY	Unit
	020010	48 inch alloy metal wrench	1	set