What is an electric threading machine?
The threading machine is a thread cutting machine that cuts the cylindrical external thread with a thread cutting head.
Also known as: electric threading machine, electric pipe cutting sets of silk machine, wire cutter, pipe thread threading machine.

How to use electric threading machine?
Use the following steps:
1. Thread machine work, the first to be processed thread pipe into the tube chuck impact jam, press the start switch, the tube with the chuck up.
2. Adjust the size of the die on the die head, set the length of the silk mouth, and then clockwise into the hand wheel, so that the die on the die

Close the end of the tube, the tooth cutter automatically cut the wire. While the cooling system automatically for the die to the fuel injection cooling, such as silk mouth processing to the pre-set

When the length of the length, the tooth knife will automatically open, the end of the mouth of the mouth to close the power, broke the chuck, remove the tube, threading machine are in inches

The The top of the head and scale, from 1/2 to 2 inches, according to the different diameter, adjust the scale on the head to the corresponding mark, the first knife in the set, the scale

The value is larger than the diameter, the second knife or the third knife before the scale value transferred to the standard diameter. For example, to process 2-inch diameter wire mouth, adjust the scale on the head

To 2 places, the middle of the head there is a cross, and mark the corresponding, tighten the nut fixed. Spindle rotation, blade and pipe contact, afterburner, set out first

Knife, back, adjust the scale on the tip to 2 corresponds to the mark, fixed. Set the second knife to complete.
3. Threaded machine also has a pipe cut off the function, the tube into the tube chuck, impact clamping, start the switch, put down the knife on the knife set, pull

Feed the handwheel so that the blade on the knife holder moves to the length of the section you want to cut off, slowly turn the handle on the cutter so that the blade squeezes the rotating tube,

Sub-rotation 4 laps 5 laps after the blade squeeze cut off.

Product Type: 2 inch threading machine
Product voltage: 220V
Product power: 750W
Product speed: 20RPM
Machining range: 0.5Inch - 2Inch
Weight: 74.4KG

Features:
1. Small size, horsepower strong
Easy to use, easy to operate
3. Simple diameter and thread length adjustment function
4. Special nitriding heat treatment, making the gear box tooth surface wear resistance increased
5. Simple scraper design

Threading machine Note:

1. It is forbidden to use saponification solution (emulsified oil)
2. It is forbidden to pipe the upper surface of the threading machine