Before operating the unit, please read this instruction book thoroughly, and retain it for future reference.Users are responsible for the proper operation and maintenance of the equipment they use. Some equipment will quickly become damaged and unsafe if abused or subjected to improper demands.

• Hot wire foam cutter is a professional heat cutting machine for foam, sponge, EPE, ribbon, KT board.

• It can heat up in several seconds.

• This machine has complete function, safe and reliable, simple operation.

• And it can adjust the angle, cutting angle.

• At the same time with a switch, the operation is more convenient!

Operating Instructions

1.     Warning: Please be sure to unplug the power line installation or removal of the electric heating wire before. Must be in the machine completely cooled condition of operation.

2.     Pay attention to the working environment.

A.   No wet operation

B.   Ensure working area air circulation.

C.   Do not work in the vicinity area of flammable liquids or gases

D.   Wear gloves when operation

E.    Keep away from flammable and explosive dangerous goods

F.    Stay away from the crowd

G.   Do not touch the tools or extension line, especially the children, keep them away from the working area.

1.     Adjust the working angle of vertical angle device to the right.

2.     The shift switch is adjusted to the open gear, and adjust the applied temperature.

3.     Wait for 3-5 second immediately after cutting articles.