1. The garlic peeling
machine is convenient and practical. It is suitable for the use in homes ,
hotels, snack bar and so on. It is the first generation of garlic machine
upgrade.
2. The machine adopts polyionic composite and
the mechanical rotation principle.
3. The machine adopts a
unique design of garlic guillotine, to replace the difficult problems of manual
breaking garlic root. Through this way that guillotine breaks garlic root, the
garlic peeling can clean more thoroughly.
1. When you received
machine, open the machine cover, take the garlic clip out, and install it in the
machine bracket.
2. Pull out the balance
bracket of machine base;
3. Left hand grasp dried
garlic, put the garlic into the bite on the side of machine, put the right hand
down to bite, cut garlic's predicle. Break the garlic into small parts, and then
put them into the machine.
4. Put about 1kg
(2.2lb) of garlic at a time;
5. Cover the lid, when it
is up to 10-15 seconds, stop it;
6. Take out the garlic
without peel, you can add other garlics, and put the remaining together,
continue to operate.
7. Repeat the above steps
to operate the machine.
NOTE:
1. The time of using the
machine when peeling the garlic can not be too long, or it will hurt the garlic.
2. Dry garlic or dry
garlic sprout generally 10-15 seconds to resolve. Fresh garlic or garlic with
higher moisture ineffective, so dried or air-dried first before peeling.
One Set of Garlic Peeling Machine. (022064)
