1: Do not touch the driving and turning parts and the tension
bar when using the tensioner;
2: In the process of running only allow tension from small to
large, not allowed by the major small, when the tension needs to
be from the major hours must be adjusted in the stop state, so
as not to cause disconnection;
3: Before the end of the commissioning, please check the working
angle of the tension rod, and if the angle is the same as the
static state, please readjust the tension to avoid the
non-normal wear and tear of the components of the tensioner and
reduce the service life;
4: Tension wheel slot not to join the oil or lubricating oil,
otherwise it will cause instability or slip phenomenon, shorten
the life of the tensioner;
5: Do not use the model does not match the operation is strictly
prohibited to exceed the parameter limits, unauthorized without
the unassembled parts;
6: If the user uses wax enameled wire, should clean the wire
site and regular replacement of wool felt, or may lead to
instability of tension or slipping over the wire wheel, and lead
to O-ring tension wheel life shortened.
