Spring Separator Machine

1.  Adjust the exit gate of spring.

2.  Place the aluminum plate to hold springs after dispensered.

3.  Please confirm the turnplate in the charging barrel is running with high speed.

4.  Take out the lid on the cylinder and you will see springs twist together.

5.  The springs after dispensered were spouted on the AL plate.

• If the springs are spouted without separating, please press the gate valve to shrink the exit, the springs will be separated and spouted automatically.

• If springs are running in the cylinder for  long time(more than 10s) and cant eject, please pull up the gate, they will be ejected after separated.

• A set of Spring Separator Machine