 |
|
300*300mm split
type Electronic hot plate preheat station 220V |
|
 |
|
Description |
|
Intelligent thermostatic heating table, Applicable to any
need to stable temperature control heating occasions, such
as PCB preheating, sealing glue dispensing, die preheating,
welding LED lamp, chemical experiment. Heating and curing,
solid state relay chip welding, etc.The operation is simple,
fast and efficient. It's a good helper for your production
and processing.
This product adopts high efficiency tube multi tube
technology combined with high quality aluminum plate as hair
heat body, heat pipe is convenient to replace, heat transfer
is uniform and transmission efficiency is high.
The temperature is controlled by the main board of the
microcomputer, and the temperature is accurate, visual and
beautiful.
①Function key *: confirm the preservation function
②Shift key: the key is shifted when the value is replaced.
③Submission key: reduce the value with this key.
④Addend key: use this key to increase the value
⑤Heating indicator lamp: the lamp is on the heat, the light
flashes to indicate the end of the heating and enters the
constant temperature state.
⑥Alarm signal: when the temperature of the table exceeds the
set temperature of 10 C, the lamp will be bright.
⑦Actual temperature: show the actual temperature on the
platform of the preheated platform.
⑧Set the temperature: show the temperature of the preheated
platform you set. |
|
Specifiction |
|
Voltage |
220V |
|
Power |
1.8KW |
|
Aluminum Plate Size |
11.81*11.81inch（300*300mm） |
|
Overall size |
13.78*13.78*2.44inch(350*350*62mm) |
|
Temperature range |
0-400℃（can open 450℃） |
|
Weight |
8kg |
|
|
|
Temperature
Setting |
|
(1)Press the "shift key" to stop the decimal point in a bit,
10, or 100.
(2) the decimal point stays in that number can be used "the
addend key" and "key to the meiotic", to adjust the number.
After setting, press "function key" to confirm and save.
(3) according to "the addend key" and "key to reduction"
also can set the temperature.After setting, press "function
key①" to confirm and save.
|
|
Temperature
calibration |
|
When
the temperature of the machine is shown to be deviated from
the actual temperature, it is necessary to set the
temperature calibration. If the actual temperature is 100 C,
the measurement temperature is 110 degrees C, the operation
method is as follows:
(1).At the same time, press the "function key①" and "the
addend key," the actual temperature window will display
"CAL", "set the temperature window to enter the actual
temperature of 110 DEG C, press the function key" can be
kept complete calibration.
|
|
Lock
Function |
|
This machine has a set of
password locking function, it can lock the temperature,
prevent the people without permission to adjust the setting
temperature at will.
(1) long press a function key for 3 seconds. The actual
temperature window shows that the required password is
entered by the In-1 settings window. According to the
function key, confirm the password and complete the password
setting.
(2)enter the lock state after completing the password
settings. Press any key operation button to display the LOC-
input password, then it can be unlocked. After shutdown,
restart the password to restore the lock state.
Note: if you forget the password, the LOC- interface is
input 1234, According to the "function key" confirmation,
the 4321 is reentered, and the password locking function can
be unlocked and cancelled according to the "function key①"
confirmation.
|
|
  S
|
|
|
|
|
|
Item Include(022536) |
|
|