
1.Used in the printing industry cardboard, corrugated cardboard ,color box
waste removal work for
150-500g paper.
2.Suitable for various specifications of corrugated paper, crater paper,
cardboard.
3.Stainless steel thickened shell , to effectively avoid the wear of the shell
and the damage to the chain or interior of the body
4.Thickened stainless steel frame baffle and anti-skid handle.
5.High strength alloy steel chain after heat treatment, with high hardness and
strong wear resistance
6.The power source adopts the pneumatic motor, good safety, meets the fire
safety requirements and long service life.
The link of motive force
;
1.The customers need compressor of
air off a complete set before operate,(>/4 KW),plastic
of the precision and a tool of supplying.
2.The barometric pressure of the standard is 0.63Mpa,the
tallest is0.7Mpa,least is
0.55Mpa,must be full for the
equipment of the supplying.
3. The gas must filter and dry before the use .or it will be block, etch, and
harmed of the machine, damaged of the motor.
4. We suggest that to use the triplex.
5.Check up the oil of supply, pull down the exhaust pipes, put a piece of paper
near the machine ,activate the motor ,if have a little oil on the paper ,so it
is normal of supply, the long of windpipe can not surpass the 5metre, for the
oil of supply with motor.
1.Determine
if the connection between the unit and the air source is not obstructed, and
ensure that the air pressure is around 6.5KG.
2.Air pipe requirements: must use specifications: 8X12mm air pipe to work
properly
3.Before
the machine works every day, must drop 3-4 drops of special oil for pneumatic
tools from the air inlet, idle for 2-3 seconds.