Commercial Fully Automatic Dehydrator
Product Features and Functions:
2. Easy to use, flexible and convenient operation, high production capacity: (Put the cut block materials into the bucket, run for about 1-2 minutes to dehydrate, and can also be used continuously, such as soy milk removal, etc.).
3. The machine is made of high-grade stainless steel, which is hygienic and durable, and can be used for soymilk removal, dehydration, oil removal, vegetable water removal, etc., which is simple and practical.
4. This series of dehydrators are widely used in hotels, restaurants, restaurants, and food processing plants. And the canteens of each unit need to desizing, dehydrating, de-oiling, de-vegetable water, etc. when making food.
| Material: | High quality stainless steel |
| Voltage: | 110V |
| Power: | 0.75KW |
| Basket capacity: | 20L |
| Weight range of ingredients: | ≤15KG |
| Diameter of the inner tank | 14.17in(36cm) |
| Diameter of the outer tank | 20in(51cm) |
| Gallbladder height: | 12.2in(31cm) |
1. Do not put your hands or other foreign
objects into the bucket to avoid injury or damage to the machine.
2. This machine is equipped with a motor overload protection device. In
the event of overload or blocked rotation, the motor is automatically
cut off from power. When the motor cools down to a point where there is
no burning sensation when touched by hand, the motor thermal protection
switch resets, providing safety protection for the motor.
3. If the machine is operating normally and there is no wastewater or a
small amount of waste residue coming out of the drainage pipe, the
drainage pipe is blocked and only needs to be unblocked.
4. If the power cord is damaged, in order to avoid injury, please make
sure to have the manufacturer, its agent, or relevant professionals
replace it.
5. This machine is not suitable for individuals with physiological
defects, disabilities or intellectual disabilities (including children),
or lack experience and common sense, unless there are relevant
regulatory personnel supervising or guiding the operation to ensure
their safety.
6. Be careful not to let children play with this machine.
7. This machine cannot be cleaned with a water spray.
8. Clean the machine correctly.
1. Check that the power voltage meets the specified requirements, the power wiring should be firm and reliable, and the power socket should be firmly grounded.
2. Place the vegetable dehydrator on a level surface.
3. Place the ingredients that need to be dehydrated in the dehydration box, note (the weight of the ingredients does not exceed 15KG). Before dehydration, please manually evenly place the vegetables in the dehydration box to prevent equipment shaking due to imbalance. Cover the top cover and lock the latch.
5. Turn on the power, set the dehydration time as required to 1-5 minutes, and start the machine,.
6. Open the upper cover and remove the dehydration box and the processed product.
7. After completing the work, remove the upper cylinder cover, remove the dehydration frame, and clean the inside of the material barrel.
This machine has an emergency stop switch, which allows for one click emergency stop in case of emergency.
Precautions and safety rules:
☆We do not assume any responsibility for failures and accidents caused
by improper use by users.
☆It is forbidden to use oversized solids and other hard and overweight
bulk materials for dehydration.
☆To ensure the safety of electricity use, it is necessary to regularly
check the cable and whether the circuit is in good condition. It is
forbidden to use when the insulating layer of the relevant circuit is
damaged.
☆The grounding of the dehydrator must be good, and it is strictly
forbidden to operate the machine with bare feet and wet hands. When the
machine is just started or gradually suspended, the body needs to be
supported to prevent the machine from swinging too much and causing
accidents.
☆When the dehydrator is working, or the power supply has been cut off
but the sieve is still rotating, it is strictly forbidden to use hands
or other tools to enter the sieve to get the material.
☆In case of excessive load, lumpy materials or uneven distribution of
materials, the machine is caused to work abnormally due to excessive
shaking force. First, quickly stabilize the machine and then cut off the
power supply (to prevent the machine from falling and causing a safety
accident) ), if it is overloaded, you should slowly take out a certain
amount of block materials in the sieve (in line with the rated working
weight of the machine) before continuing to work. If the material is
uneven, the material should be placed flat again, and then the machine
should be turned on for work.
☆When the dehydrator is not used for a long time, be sure to disconnect
the power supply, and use waterproof, moisture-proof, dust-proof and
other protective measures
☆When the machine is working, it is forbidden for children to play near
the machine to avoid safety accidents.
You can make order
with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost.