Fully Automatic Concrete Wall Cutter
reinforcement, change design, etc., can cut door holes, Windows or elevator holes
and other large area wall cutting. The structure is non-destructive and formed
once, which can avoid the damage of the traditional master knocking on the building
structure. Save material resources, manpower, but also can save a lot of time and
costs.
Wall cutting machine, the use of heavy industry grade double insulation high power
motor and reducer, low failure rate, long service life, save maintenance costs. The
special mechanical clutch protection device effectively prevents the damage to the
machine and personnel due to misoperation. In addition to improving the
construction quality and speeding up the construction speed, the fully automatic
cutting machine also greatly reduces the labor intensity of the operator.
This is an automatic feed, automatic cutting (that
is, the track is automatic, the
feed is also automatic), automatic wall cutting machine easy to operate,
more
labor-saving, higher safety.
| Rated Voltage | 220V |
| Input Power | 6180W |
| Blade Diameter | 31.5″(80cm) |
| Max Cutting Depth | 12.6″(32cm) |
| No-load Speed | 350rpm |
Digital display control box
Digital display, real-time monitoring
of the host operation data, adjustable
speed, remote operation, safe and
durable.
Thickened steel clamping plate, high
strength, wear-resistant and not easy to
deformation.
Folding
rotating hand wheel, personality
design, easy to operate, all plastic
shell, high insulation strength.
Aviation grade aluminum profile refined,
high density, wear-resistant, not easy
to deformation or broken teeth, precision
run-in, teeth uniform, not stuck teeth.
Provide
water when cutting the next door
to prevent excessive temperature damage
to the saw blade.
Fast
connection between controller and
host, safe and convenient.
1. Installation and
fixation of the machine.
After installing the track, saw blade, and cover of the main machine,
grasp the top of the machine with your
hand and shake the machine vigorously from side to side. If the machine
shakes, it is necessary to adjust the
expansion screw on the rail and tighten it with a wrench. Cutting can
only be carried out when the machine is
not swayed laterally or longitudinally.
2.The motor inside should pay attention to waterproof.
If the motor inside water, will cause electric shock or motor burn.
3. Cutting must be cooled in the water inlet valve.
Because the overheated saw blade will shorten its
life, so in the cutting process, please pay attention to be
sure to
supply water in the inlet valve, in addition, please pay attention to
the use of recycled waste water,
otherwise it will
affect the flow of water, resulting in damage to water seals and other
parts.
4. Use a diamond
saw blade.
This cutting machine should use diamond saw blades, and other cutting
saw blades cannot be used instead of
diamond saw
blades.
5.Allow the saw
blade to fully rotate before starting cutting.
Turn on the switch and wait until the saw blade has fully rotated before
starting normal cutting.
6.Do
not touch the saw blade in rotation.
Do not touch the saw blade when the Angle is still rotating. This will
cause serious injury and is very
dangerous.
7.When
operating at heights.
If the machine is operated at a high altitude, please pay attention to
selecting a stable and secure location
for
installation.
8.When
the cutting machine is cutting laterally.
Because the machine must use cooling water during operation, it is very
dangerous for the main machine motor
to be above
during horizontal cutting, and vice versa. When the saw blade is above,
water will run into the
motor, which is very
dangerous.
9.When
an abnormal phenomenon is found.
In the process of cutting, if the saw blade stops or you hear an
abnormal sound, please turn off the switch
immediately.
10.Please
clean the machine after use.
In order to maintain the service life of the machine, please keep the
fuselage clean at any time after use.
plug, please connect
the power cord to
the air switch.
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us
with low cost.