110V Vertical Horizontal Drilling Machine For Woodworking
This
machine tool is mainly used for the installation and punching of hinges
on
cabinet furniture door panels and three in one connectors on cabinet
bodies.
The machine can have three vertical holes at a time, with one large hole
being a
hinge head hole or a cabinet connection hole, and two assembly screw
holes; And
a side hole. It is an ideal tool for producing large and medium-sized
solid wood
panel furniture.
This machine adopts a safe AC voltage of 110V and an all aluminum formed
motor
tray. The upper machine head drill bag uses a 48-6 drill bag, which can
be used to
drill hinge holes and cabinet holes. The side machine head can prepare
its own drill
bits as needed. Two drill bits with a diameter of 15mm and 8mm are
randomly
provided. The upper and side motors are both made of 1.5 kW pure copper
high-power motors.
| Voltage | 110V |
| Power | 1500W*2 |
| Combined Drill Model | 48-6（φ35mm*1,φ3mm*2） |
| Drill Chuck Specifications | 3-16mm (Gift Drill φ8*1, φ15*1) |
| Speed | 2840r/min |
| Air Pressure | 0.6-0.8MPA |
| Table Size | 29〞*17〞/74*44cm |
| Horizontal Drilling Depth | 0-75mm |
| Vertical Drilling Depth | 0-50mm |
vertical configuration and a 3-
16mm drill bit clamp with
horizontal configuration.
Users can replace horizontal and
vertical drill packs and drill bit
clamps according to their own
needs.
free of charge with drill bits of diameter φ8 and
φ15. If you need drill bits of other
specifications, please purchase them yourself.
direction can be operated separately, can
also be operated at the same time.
bit can be adjusted through the knob.
adjusted by adjusting the position of the
limiting flange.
sensitivity,stable and durable, anti-skid wear,
free hands.
wear resistance.
ensures accurate positioning.
the board from moving when drilling.
1.Before operation, check whether the power cable is properly
connected, whether the protective device and the pressing
device
are complete, and whether the components are normal.
2.The operating position
should be bright and without shadow.
3.The drill should be
centered, balanced and sharp.
4.This machine is mainly
used for wood punching processing
(thin aluminum can also be), and the selection of materials
can not have nails, screws and other tools damaged or blunt
foreign bodies.
5.Hands should not touch
the rotating parts of the machine
tool during operation, and the wood chips should not be
removed during operation. The power supply must be cut off
before adjusting or removing the wood chips, and can only be
carried out after the machine tool stops working.
6.Stop the machine immediately if anything abnormal is found.
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us
with low cost.