Spindle Motor 220V 6KW(Flanged) |
Product Overview |
Spindle motor has the advantages of fast speed, small volume, lightweight, low material consumption, low noise, low vibration.It is widely used in wood, aluminum, metal, stone, metal, plastic and other materials carving processing, widely used in many industries, can greatly improve the processing quality and accuracy. |
Product Parameters |
Voltage: | 220V |
Power: | 6KW(8HP) |
Current: | 27.27A |
Operating Frequency: | 300Hz |
Collet Nut: | ER32 |
Clamping Range: | 0.118"-0.787"(3mm-20mm)[Standard with 6mm collet, if you need other sizes please contact us] |
Clamping Diameter of Collet: | 0.236"(6mm) |
Motor Speed: | 18000rpm |
Cone Hole Beat: | 2UM |
Cooling Mode: | Fan Cooling |
Lubrication Mode: | Grease Lubrication |
Fuselage Material: | Pure Aluminium |
Packing size: | 17.7"*8.3"*7.9"(45cm*21cm*20cm) |
Net weight/Gross weight: | 32.4LB(14.7kg)/33.7LB(15.3kg) |
NOTE: Spindle motor must be equipped with frequency converter.Set up frequency converter correctly according to machine requirement. The item is not included frequency converter. |
Optional Specifications |
Product Number | Voltage | Power | Nut Type | Clamping Range |
053290 | 220V | 2.2kw | ER25 | 1mm-16mm |
053289 | 220V | 3.5kw | ER20 | 1mm-13mm |
053288 | 220V | 4.5kw | ER32 | 3mm-20mm |
053149 | 220V | 6.0kw | ER32 | 3mm-20mm |
056291 | 220V | 7.5kw | ER32 | 3mm-20mm |
Product Features & Advantages |
- Through the inverter to adjust the
output voltage and frequency can be achieved 0-18000 stepless. - High precision bearing and pure copper coil, high machining accuracy, long service life. - Pure aluminum body, anti-oxidation and anti-corrosion, lighter weight. - Adopt precision steel ball holder to ensure spindle rotation accuracy in high speed grinding. - Lubricating grease resistant to high temperature of 200℃, low noise. |
Matters Need Attention |
- must match the drive spindle chosen
correctly according to the electric spindle nameplate good
debugging power, voltage and frequency. - Set the frequency converter should be set command channel, and then set the display channel, and finally set the parameters. When setting parameters, be sure that the reference frequency, the frequency of the three highest rated frequency and consistency. - The spindle is generally clockwise in the wrong direction, the drive can change settings or swap any two rotating wire the inverter output UVW terminal on. - In general, water-cooled spindle surface temperature and ambient temperature greater than 20 degrees, the heat can be considered a spindle; when air-cooled spindle surface temperature greater than ambient temperature of 30 degrees, can be identified as the main heat seriously, immediately shut down cooling, a check. |
Product Presentation & Details |
Item Included(056149) |
Spindle Motor *1 | Fork Wrench *1 | Collet Wrench *1 |
You can
make order with no worry. |