Usage note:
1.The size of the workpiece should be within the clamping range,
not exceed, otherwise it will pose a threat
2.Choose the appropriate through hole size according to the
workpiece
3.The clamping force should meet the cutting requirements
4.The
required speed should be within the limit speed
Before work should, in turn, check and test for the following items:
1
confirm chuck and top jaw jaw chuck (separation) installed firmly
2 confirmed jaw clamping of the solitary
3 is in the same radius of gyration insert chuck wrench rotation
in the gear hole can make the jaw move freely set minimum
4 spindle speed, if working properly, rotate speed, and check the
beat chuck and presence of abnormal condition
|