|
|
| Engine starter for a helicopter model |
 |
 |
 |
 |
 |
 |
|
Detailed description: Size 237*85*144 (mm) Line is 500 mm long Weight: 1425 g Applicable voltage: 12v-18v (11.1v lithium polymer battery or battery over 9AH is recommended) Current | : 40A Cup head: A small head Model: The helicopter Oar cover: above 2.25 inches Methanol machine: 15-90 grade Gasoline engine: 15-260 grade |
| Feature: |
|
1.Craftsmanship CNC processing, perfect oxidation fine, shiny 2.Bite technique The starter adopts aluminum alloy starting cup head with teeth occlusion, which solves the problem of slipping of most starters and is more durable without slipping. 3.Wear-resisting glue head The starter is made of high abrasion resistant silicone with a certain softness and stickiness in order to better grasp the helicopter starter or fixed wing rotor cover Efficiency doesn't slip.At the same time, it has certain hardness and is more wear-resistant. 4.Cone design Large start rubber head with conical design, better increase the contact surface with the paddle cover, no slip. 5.Sensitive touch Use point switch, sensitive touch, longer life.The position of the switch is ergonomic, whether it is to start the fixed wing or the helicopter to respond perfectly |
|
Note:
the battery clip can be used in the external field to clip the
car battery. Remember that both the helicopter and the fixed wing start counterclockwise. Be sure to make clear the starting position, because the positive and negative electrode clips rotate in different directions.Unless you're doing something else, don't do it the wrong way |
|
Note: 1. Single power duration should be less than or
equal to 3 seconds, continuous times should be less than or
equal to 5 times, please wait for cooling before use 2. The helicopter starter rod needs to be purchased by yourself |
| Item Included(054545) Model aircraft starter*1 |
|
You can
make order with no worries. |