| AT300 multi-functional tool machine is a
multi-functional composite tool machine, it has the function of turning,
drilling, milling, suitable for metal and other materials of turning,
drilling, milling, cutting and other processing;This machine can be used
for turning inner and outer circle surface, cone surface, plane and
male, inch thread, also can be used for drilling, plane milling, keyway
milling and other processing processes.The machine tool has complete
functions, is the family DIY, school teaching, factory processing and
other indispensable equipment |
| Model: |
AT300-2 |
| Voltage: |
AC110V/60Hz |
| Power: |
550W(3/4HP) |
| Distance between centers: |
19.68"(500mm) |
| Swing over bed: |
11.81"(300mm) |
| Spindle bore: |
1.03"(26mm) |
| Maximum drilling diameter: |
0.79"(20mm) |
| Maximum lateral stroke of tool
rest: |
7.87"(200mm) |
| Maximum rotary diameter of
workpiece on tool rest: |
5.51"(140mm) |
| Maximum longitudinal stroke of
small tool carrier: |
3.15"(80mm) |
| Spindle sleeve movement
distance: |
3.15"(80mm) |
| Diameter of chuck |
5.12"(130mm) |
| Headstock taper: |
MT4# |
| Tailstock taper: |
MT3# |
| Drill and mill spindle taper: |
MT3# |
| Maximum movement stroke of
tailstock sleeve: |
1.97"(50mm) |
| Spindle speeds: |
160-1600r/min |
| Metric thread kinds on
processing: |
14 |
| Metric thread pitch on
processing: |
0.02"-0.12"(0.5mm-3mm) |
| Inch thread kinds on processing: |
20 |
| Inch thread pitch on processing: |
11-40 1/n" |
| The longitudinal feed of the
tool rest for each revolution of the spindle: |
0.002"-0.02"(0.05mm-0.5mm) |
| The lateral feed of the tool
rest for each revolution of the spindle: |
0.002"-0.02"(0.05mm-0.5mm) |
| Drill and mill the distance from
center of spindle to column surface: |
6.89"(175mm) |
| Width of t-slot of milling
table: |
0.47"(12mm) |
| Maximum lateral stroke of
milling table: |
7.87"(200mm) |
| Dimensions of milling table: |
7.87"*5.90"(200mm*150mm) |
| Number of spindle speed types
for drilling and milling: |
9 |
| Number of spindle speed types
for turning: |
6 |
| Spindle to table
distance(Min-Max): |
9.45"-12.60"(240mm-320mm) |
| Vertical lift stroke of drilling
and milling head: |
3.15"(80mm) |
| Angle of rotation of drilling
and milling head around column: |
360 degree |
| Machine size: |
43.3"*24.0"*34.2"(105*61*87cm) |
| Gross weight: |
450lb(204kg) |
