| KC-9363C 110V 88LB Simulated Automobile Transport Vibration Test Bench |
 |
| Product Overview |
|
The
field sports car test is to put the packaged or non-packaged
products on the transport truck, transport at the speed of 30 ~
40 km/h to withstand the actual road condition capacity, and
drive 200~400km on the tertiary highway, which is a relatively
original test method. The disadvantage of this method is that it
consumes considerable manpower, material resources and time, and
it has low dominance. This simulated vehicle transport test bench is used to simulate the vehicle transport vibration environment described above. The influence of actual working conditions on articles can be obtained in the laboratory, and the products with quality no more than the nominal weight can be used for road transportation simulation test. The simulation conditions are: the random vibration environment generated by the speed of driving at a speed of 20 ~ 60 km/h in low-level, third-level roads, intermediate-level roads and fourth-level roads. To examine the adaptability of products to automobile transportation vibration and the confirmation basis for assessing their structural integrity。The test bench can meet the Chinese industrial industry standardsQJ/T815.1-1994. |
| Product Parameters |
| Voltage: | AC110V |
| Power: | 1.2KW |
| Rated test load weight: | 88LB (40KG) |
| Range of speeds: |
100～300rpm |
| Maximum amplitude: |
25.4mm(±15%) |
| Vibration mode: |
Swing |
| Simulation speed： |
20～60km |
| Working table size: | 19.7"*19.7" (500MM*500MM) |
| Use environment: |
Temperature5～40℃; humidity≤85%RH |
| Standard： |
QJ/T851.1-94 |
| Package size: | 26"*24*24" (66CM*60CM*60CM) |
| Net weight/Gross weight: | 154KG(70KG) / 165KG(75KG) |
| Product Features & Advantages |
|
-
Intelligent control : Built-in overload protection fuse, and equipped with high-performance chip, read data more accurately. The microcomputer protection circuit is adopted to overcome the defect that the ordinary machine is burned by the impulse voltage when starting up, and the use is more convenient and reliable. - Power off automatic memory : Automatic setting, simple operation, the use of advanced microcomputer control circuit, you can permanently memory set parameters, power will not lose data; At the same time, the number of vibration program segments and the number of program cycles can be set. When the machine completes the vibration test stop or the machine is shut down and powered off, the machine will automatically remember the current vibration data and automatically reset. - Simulation running vibration speed and simulation time can be set arbitrarily within 0~99 hours. - Synchronous and silent broadband transmission, with low noise. - The platform is made of high-quality industrial tank steel and national standard aluminum, and the base is equipped with high strength vibration reducing rubber, stable operation and strong load capacity. - According to the development of Chinese industrial standards, rotary vibration. |
| Usage Method |
| Reconfirm whether the machine
is properly connected as specified in the operation manual. 1. Place the test product in the center of the vibration table, adjust and clamp the test sample appropriately. 2. Use the wrench to loosen the nut on the bar. 3. Position and clamp the test product, and tighten the nut. 4. Plug in. 5. Turn on the power switch. 6. The screen power displays the last-time set time value. 7. Resthe test time according to product test requirements. |
 |
| Item Included(056087) |
| Simulated Automobile Transport Vibration Test Bench *1 |
|
You can
make order with no worry. |