1" Electric Rebar Bending and Cutting Machine 3 Feet Controls 110V 1700W

Product Overview
The rebar bender machine can bend 0.16'' to 1" (4 to 25 mm) rebar to 0-180° in 3.5 seconds. Add cutting function below, can cut the steel bar, four seconds to cut through a piece of steel. Three standard foot pedal control switches for hands-free bending and cutting. It is widely used in construction engineering, used to bend round steel, rebar, screw and so on, the machine can be batch operation.Built-in safety device can stop operation immediately.
Product Parameters
Model: RBC-25
Voltage: 110V
Power: 1700W
Bending Angle: 0-180°
Max.Rebar Diameter: 0.98" (25mm)
Min.Rebar Diameter: 0.16" (4mm)
Bending Speed: 3.5 Seconds
Cutting Speed: 4 Seconds
Amps: 15A
Max.Rebar Hardness: HRC30
Bending Radius: 1.53"(39mm)
Gyre idler wheel diameter: 3.70"(94mm)
Certificate: CE RoHS PSE KC
Package size: 22"*20"*40" (56cm*50cm*99cm)
Net weight/Gross weight: 275.5LBS(125kg) / 347LBS(157.5kg)
Product Features & Advantages
1.Bend Angle: 

Two bending Angle adjusting handle can preset two bending angles from 0° to 180° at the same time. When multiple bending angles are needed, there is no need to set the Angle frequently, saving time and effort.

2.Cut off:  

The machine is added under the cutting function, set bending and cutting in one, 4s can cut off a steel bar, a multi-purpose machine, saving time and labor.

 

3.Four Handles:

There are two firm handles at the front and back, which is convenient for two people to carry mobile equipment at the same time. Mobile equipment is more worry and effort saving and safer.

4.Steel Idler Wheel:

The high-strength steel Idler Wheel is made of 40 chromium with a thickened design is more firm and hard to break the shaft. Smooth surface treatment, easier to bend steel.
 

5.Fixed Device:

The fixed device can be adjusted by moving back and forth, and the steel bar can be fixed flexibly and easily bent. Lifting bolt screws are convenient for moving the machine.
 

6.Vent Hole: 

There are a large number of air vents on the left and right sides, which can discharge the excess heat generated by the pump body in time, prevent the temperature from being too high, and protect the pump body and seals.

 

7.Foot Switch:

Through foot switchs can control the preset bending Angle and cutting function, just step on the foot switch can quickly bend the steel bar, the operation design is humanized.

8.Wide Application Scenarios:

Widely used in construction sites, railway and bridge construction, production workshops, etc.

9.Wide Range of Application:

It can bend 4-50mm rebar, round steel, medium carbon steel, low carbon steel and other materials.

- 1700W high-power pure copper coil motor, smooth operation, low noise, long life, higher work efficiency.

- The bending speed and cutting speed are super fast, which can complete the bending of a steel bar in 3.5 seconds, and complete the cutting of a steel bar in 4s, saving time.

- The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste.

- This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending.

- Foot switch design, convenient and efficient bending. With four handles on the corner for you to transport and operate effortlessly.

Product Presentation & Details
 
Item Included(056271)
Rebar bending and cutting machine *1
English manual *1
Foot switch *3

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.