新建网页 1

https://topseller365.com/data/prd/056/278/%E8%83%8C%E6%99%AF%E6%A8%A1%E6%9D%BF1.jpg

102A hot melt adhesive machine

I:product description:

The product is widely used, mainly in toys (attached fixed wiring, insulation);Box sealed packaging;Leather handbag;Small household appliances, wires, connectors, connectors;Audio, photo frame;The label;Hardware fixation;Adhesives and fixations for small paper products;Small ornaments, handicrafts, hairpins, etc.Fixing, bonding and insulation of electronic products;Others require manual or semi-automatic use of glue.

II:Product advantages and features:

1, light weight, small size, easy to move. Can be arbitrarily placed on the work table.

2, the opening of the tank is simple and easy, convenient feeding, high safety.

3, pneumatic power system. Save energy, reduce the production cost of the enterprise effectively.

4, the structure is simple and easy to repair. Only according to the instructions of the use and maintenance guidance can be maintained.

5, pressure and flow can be adjusted. Can control the spray pressure and nozzle flow free travel.

6, melt rate. Using 800W power and high efficiency thermal insulation device. To save energy, improve the melt speed.

7, the failure rate is low. The structure is clear, and the component parts are connected with the minimum system. High reliability.

8, operating temperature range. The use temperature can be 20 degrees C 200 c, under certain conditions can be used in 260.

9, the timer can control each usage amount. Can choose to control the time for 60 - 0 seconds of a variety of time controller.

10, valve control glue instant off sensitive. The gas is used to open the spring, and the switch is sensitive.

11, low cost of equipment for enterprises to save investment.

12, the operation is simple, the new employees as long as 10 minutes of training that can operate independently of the equipment.

13, improve product performance and grade. Compared with the common hot melt glue gun, the product is bonded more firmly, and the efficiency is higher.

14, improve efficiency and reduce waste. After the glue without waiting, ready to use. No glue noleak adhesive, reduce waste.

15, wide application range, no heating melt type, shape, viscosity, melting temperature, spraying and other restrictions.

III:Product parameters:

Model	YD-102A
Voltage	220V
Heating tank capacity	1.0L
Melt rate	5.5lbs/hour
Operating temperature	50℃-300℃
The glue	Glue, strip and spray
Size	19.715.124.0inches
Pressure range	0.3-0.6Mpa

IV.Matters needing attention:

safety	Always wear safety gloves, goggles, and long-sleeved work clothes to protect your body from hot liquids Hot glue scald, or by high temperature components surface burns. 1. Excessive water vapor should be avoided in the air path; 2. The capacity of hot melt glue barrel shall not exceed 7 percent of the capacity of glue storage barrel; 3. Set the maximum total pressure as 4KG; 4. Before adding hot melt adhesive, pressure relief shall be conducted in the plastic storage bucket.
Preparation before operation	1. Before operation, it is strongly recommended that the operator take good safety precautions to reduce the probability of industrial injury to zero Combined with safety precautions. 2. Check whether the operating voltage of the machine is 220VAC, and there is no fluctuation of the apparent voltage. 3. Check the amount of glue in the barrel.If less than 1 point full, please increase to 7 points full, do not exceed 7 points full. 4. Check whether the temperature of the rubber barrel is set at about 170 ° c (note: different hot-melt adhesives have different softening points; For specific set value, please refer to the data provided by hot melt adhesive supplier. 5. Check whether the foot switch is connected and whether conductive objects touch the components in the electric cabinet. 6. Check whether the air supply system is basically dry and whether the pressure of the air path is stable. 7. Power on and ventilation test whether the circuit, gas circuit and rubber circuit can work normally.
Boot steps	1. Connect the power supply and turn ON the power switch; 2. Check whether the temperature of the temperature controller is in the above range; 3. Check whether the pressure relief is turned in the direction of pressure holding; 4. Connect air source, set pressure value and start operation
Notice of hot melt adhesive	1. When adding hot melt glue to the plastic storage bucket, rotate the pressure retaining switch to the pressure relief direction first; 2. After pressure relief, open the cover of the plastic barrel;Add hot melt adhesive; 3. When adding hot melt adhesive, do not add more than 7 minutes of plastic storage barrel; 4. After hot melt glue is added, lock the cover of the barrel.
Shutdown steps	1. Loosen foot switch and cut off the main power; 2. Disconnect the air pipe or set the pressure regulating valve of the water filter cup to zero.

V.Product display:

VI.Items included:

A 102A hot melt adhesive machine(056278)

新建网页 1

Shipping & Handling Details

Default Shipping Cost or Free Shipping Information:

▲ Default shipping cost or free shipping service is only for the customers from Canada or the lower 48 United States by Canada Post, USPS or the UPS Ground. Customers from other areas or needs other shipping ways, please contact us.
▲ Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there WILL be extra shipping costs, please contact us for more detailed information.
▲ Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.

Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.

Sales tax / Customs duties: Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.

Damage In Shipping: Email or call us First! We will work with you to get the case resolved in the fastest method.

Return / Refund

If you are not 100% happy with your purchase, please contact Us. Please don't directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.

Returns & Exchanges

▲ All returns must be made within 14 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
▲ Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
▲ Returns that are the result of our seller's error: Buyer will receive a full refund of the item as well as shipping charges
▲ All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.

Defective & Damaged Products

▲ If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲ Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
▲ If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.

Payment

PayPal: PayPal preferred only with a confirmed address. We want you to feel secure in your purchase. Keep everything within PayPal and eBay protects both buyer and seller.

eCheck Issues: Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. Then we will arrange shipments for you.

Warranty & Feedback

▲ 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
▲ Any warranty shipping cost to us is responsible by buyer.
▲ Any shipping cost to buyer is responsible by the seller.
▲ We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive feedback as it's very important for us. Thanks very much.