![]() |
110V Automatic Wire Crimp Terminal Pull Tester Machine Tensile Testing Machine 490N![]() |
Product Overview |
Tensile testing machine is a device for testing the pull-off force of wire harness terminals, designed to ensure the quality and reliability of wire harnesses and electronic products. This test instrument is mainly used to detect the pull-off force between wire harness terminals to ensure the reliability of the product in various usage environments. |
Product Parameters |
Voltage: | 110V |
Power: | 0.1kW |
Unit of measurement: | kg.f / N / LB |
Maximum speed: | 600mm/min(real measured data) |
Testing range: | ≤490N(50kgf) |
Testing accuracy: | ± 0.09lbs(0.04kg) |
Package size: | 20"*10.2"*11" (51cm*26cm*28cm) |
Net weight/Gross weight: | 24.9lbs(11.3kg)/27.1lbs(12.3kg) |
Product Features & Advantages |
![]() |
|
|
![]() |
![]() |
|
|
![]() |
How to Use |
![]() |
a) Power on the device. b) Reset the device while ensuring that the measuring head is not under test. c) Set the upper limit of pulling force (two methods) 1) Method 1: You can directly click the input box, enter the upper limit of tension. 2) Method 2: you can directly click on the “Set Load”, enter the selection interface to select the corresponding parameters, such as the table does not correspond to the parameters, you can customize the parameters in the selection interface in the third page and the fourth page for the next time to use. d) Set the hold time. e) Press the start button to measure. f) When the measurement is finished, the measurement result (PASS or NG) will be shown on the touch screen. |
Product Presentation & Details |
![]() |
Item Included(056334) |
Tensile Testing Machine *1 |
Power Cord *1 |
Wrench *5 |
You can
make order with no worry. |