HK-5W 110V Portable Weaving Auto Weld Carriage Welding Trolley for Alloy Welding Machine Steel Structure with Swing 150-1900MM/MIN Oscillation Auto Welding Carriage

B. You can adjust swing speed, swing angle, offset position of centre and length of stay. Suitable for different sizes of beads. Maximum carriage speed is 1900mm/min under non-welding condition.

C. The magnetized handle can reduce a small amount of magnetism, which is convenient for cleaning iron chips and moving the carriage.

D. There is an arc shrinking device. Arc shrinking time is about 0-7 seconds.

E. The trolley is equipped with a permanent magnetic guide rail to avoid welding line deviation.

F. The trolley has small capacity, light weight and easy to carry. Even unskilled workers can operate it easily. The control device can be detached and used as a remote control box.

- Improve working efficiency: 1.5 times of manual welding.

-Avoid defects in weld quality caused by human factors. The defect rate of manual operation is about 200%, while the auto welding cart has no defect rate. In terms of overall efficiency, it is 200% more efficient than manual operation.

- The high degree of automation ensures weld quality.

- Unskilled workers can also master the operation of the machine.

- The HK-5W swing auto-welding trolley has a swing arm design that allows for larger weld seam sizes than a standard fillet welder. It not only has the advantage of being lightweight, but also improves welding efficiency.

A device that rolls along the base material surface to guide the exact welding position, which improves welding efficiency and quality, and ensures an efficient welding process.

It is designed with high-temperature resistant rubber wheels, and the four-wheel drive mode allows the trolley to walk with a high degree of smoothness. At the same time, the welding is not easy to stick.

It is convenient for the installation and movement of the car, and the permanent magnet is installed to avoid the phenomenon of the car leaving the welding line.

The trolley is equipped with an inductive stop switch. When welding stops, the trolley will stop automatically. It is convenient for one person to operate several machines.

Check and maintain the unit regularly in accordance with the following, so that the welding trolley is always in optimal condition.
(a) Is there dust accumulation?
- Control box, welding torch adjustment part switch should be wiped and kept clean frequently, no welding dust.
(b) Does the dirt accumulate?
- The sediment at the end, torch head, guide wheel, driving wheel and slider parts should be removed to avoid affecting the safe operation of the car.
(c) Are the screws of the torch fixing frame and guide wheel loose?
- Screw loosening will make the car walk poorly and the weld path is not uniform, the screw part should always confirm its tightening state.
(d) Is it difficult to adjust the X-Y slider?
- The slider should be lubricated frequently.
(e) Confirm whether joints, connecting wires, hoses, welding torches are broken or damaged?
- Check regularly whether the joint is loose, and whether the connection line, hose, welding torch is broken or damaged.
(f) Is there any abnormal sound or fever?
- Check the guide wheel, motor, welding torch and other components regularly for abnormalities.
(g) Is the fuse blown?
- If the power indicator is not on during welding, check the fuse first.

Product Presentation & Details

Product Prestation &

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.