|
110V Dental Lab Agar Mixer Hydrocolloid Duplicating Machine |
|
|
| Product Overview |
| Duplicating Machine is used for melting and mixing duplicating gel in prosthetic dentistry. It is a necessary equipment for duplicating molds. The mixing tank of the machine is made of stainless steel, which is corrosion resistant, and the property of the Duplicating Gel will not be changed. This is an economic machine which can melt and heat very quickly. The machine can heat, mix, cool down automatically. All operations can be done by pressing the buttons. |
| Product Parameters |
| Voltage: | AC110V/60Hz |
| Mixing speed: | 28rpm |
| Heating coil power: | 800W |
| Motor power: | 450W |
| Working cycle time: | 1 to 2 hours |
| Agar mixing amount: | 4.4lb-11.0lb(2kg-5kg) |
| Package size: | 23.0"*16.5"*16.9"(43cm*42cm*58.5cm) |
| Product size: | 12.6"*11.0"*18.9"(32cm*28cm*48cm) |
| Gross weight: | 52.9lb(24kg) |
| Precautions for use: press the heat preservation button after the temperature reaches the predetermined temperature and the agar is completely melted!!! | |
| Product Features & Advantages |
 |
 |
 |
| - The machine adopts a resistance wire attached
to the outside of the pot and a heating strip, which can be heated
evenly. - Use stainless steel inner pot, stir evenly in the pot to avoid local high temperature. - Digital thermostat with upper and lower temperature is adopted, and can be thawed at low temperature. - AGAR can be cast at the temperature near the solidification critical point to obtain accurate casting. - Fast heating, easy to use, easy to operate, good quality and long life. |
| Product Presentation & Details |
 |
 |
 |
 |
 |
 |
| Item Included(056510) |