| Model: |
Type 340 |
| Voltage
frequency: |
110V |
| Power: |
0.75kW |
| Phase
number: |
1 |
| Production
capacity: |
1102lbs-2205lbs/h(500kg-1000kg/h) |
| Cutting
thickness: |
Fresh meat:
0-2.75"(0-7cm)
Slightly frozen meat: 0-1.97"(0-5cm) |
| Material of
food contact parts: |
304 stainless steel |
| Cutter: |
Standard round cutter
(Imported 440C blade) |
| Blade
spacing: |
0.79"(20mm)
(Customers have other size requirements can
customize the tool set in the range of 0.39"-2.36"/10-60mm) |
| Width of
conveyor belt: |
13.4"(340mm) |
| Size of feed
port: |
13"*2.95"(330mm*75mm) |
| Package
size: |
40.94"*28.74"*54.33"(104cm*73cm*138cm) |
| Net
weight/Gross weight: |
321.87lbs(146kg) /
412.26lbs(187kg) |
|
Please
read before purchase:
a. Applicable to all
kinds of pork, beef, poultry and other boneless raw
meat
b. Poultry with bones CAN be cutted(chickens, ducks, geese,
etc.), requires additional set of serrated knife
c. CAN NOT cut hard bones like ribs
d. Slightly frozen meat: ≥-5℃ |
Conveyor belt with folding design,
retractable, space-saving, can be disassembled for
cleaning. The conveyor belt is 13.4" wide, allowing for more
poultry and meat. Food grade PVC material, can withstand
heavy material load, smooth surface, easy to clean, not easy
to adhere to food residues, reduce bacterial growth, to
ensure the health and safety of meat products.
|
Change the whole set of cutter by
tightening or loosening these screws, ten seconds quick
dismantling, easy to change and rinse different cutters.
|
 |
It prevents your hand from touching the
blade and getting injured, and protects the user's safety.
There are many holes on the top, which do not affect the
sight and normal operation, you can check the working
condition of the machine at any time, and the machine can
also effectively dissipate heat, ensuring high performance.
|
There are four 360° universal plastic
casters at the bottom, wear-resistant and anti-slip, easy to
move the machine. The screw on the left will adjust the
height, if the support leg is adjusted downward, the wheel
will gradually leave the ground and rely on the support leg
for support, if you want to move the machine, adjust the
support leg upward, so that the wheel falls down and touches
the ground.
|
|
- Pure stainless steel body shell,
beautiful and neat, easy to clean.
- Automatic operation of the machine, free
hands, greatly improve production efficiency.
- Place the meat on the conveyor belt and
automatically transfer the meat to the blade position to cut the
meat.
- The thickness of the blades can be made according to the
user's requirements.
- Quickly dismantle the conveyor belt and the cutter, which is
convenient for cleaning.
- Small volume, does not occupy space, low
noise.
 |
|
- DO NOT to clean the
conveyor belt with boiling water!!! You can use warm water and
detergent to clean it.
- Be sure to lock four screws (two on the front, two on
the back, please see image above) on the conveyor belt before
starting the cutter, otherwise it will cause the cutter to cut
off the conveyor belt!!!
- Please replace the bearing immediately if the conveyor belt
runs abnormally, so as not to damage more parts.
-This
machine has been cleaned before leaving the factory, but there
may be dust and other contaminants in the logistics and
transportation, so please clean the cutter and surfaces of this
equipment after installing it. |
|
