Voltage: |
AC110V 50/60Hz |
Motor power: |
80W(maximum) |
Running
speed: |
300-1200rpm |
Operating
environment: |
Temperature 14℉-113℉(-10℃-45℃)
Humidity <90% |
Range of
application: |
Solder paste, ink, glue,
etc |
Display
mode: |
LED digital display |
Specifications of solder paste pot that each fixture can hold: |
dia:2.36"(60mm) /
height:2.83"(72mm) |
The diameter
range in which a fixture can be clamped: |
2.48"(63mm) |
Timing range: |
1s-99h |
Noise: |
<40db |
Rotation speed of stirring tank: |
1200/min |
Package size: |
21.65"*21.26"*20.47"(55cm*54cm*52cm) |
Net weight/Gross weight: |
70.55LB(32kg)/83.78LB(38kg) |
 |
3. Carry Handle
There is a handle on both
sides of the mixer, reasonable design, comfortable grip,
convenient to move the machine at any time, to ensure
personal safety.
|
4. Watch Window
The machine has a transparent
observation window, you can observe the stirring situation
and the internal situation of the machine at any time.
|
 |
 |
5. High Rotation Speed
The motor has been
reinforced design, the maximum speed can reach 1200 RPM. Two
solder paste cans can be stirred at the same time. Operation
noise of solder paste mixer: low operating noise <40dB.
|
6. Stir Well
This machine can effectively
mix tin powder and solder paste evenly. The solder paste
will not be oxidized or hydrated, ensuring the softness and
activity of the solder paste.
|
 |
1. Adjust the
panel time control to a better mixing time.
2. About 3-5 minutes, depending on the brand and situation of
the solder paste.
3. After press the start switch, the operation indicator light
is on.
4. The machine starts to stir automatically at high speed until
it stops automatically.
5. Open the cover and automatically cut off the power supply.
6. After the operation is completed, the operation stops, and
the display screen shows the actual stirring time.
7. If you want to stop the machine during operation, press the
power switch.
8. Stop and cancel the operation. |
|