| Voltage: |
110V |
| Power: |
750W |
| Function: |
Cutter/Hole Puncher/Flat
Bending/Vertical Bending/Knurling |
|
Output cutting force: |
35ton |
|
Output punching force: |
35ton |
|
Output flat/vertical
bending force: |
35ton |
|
Output knurling
force: |
55ton |
|
Cutting max(Width*Thickness): |
7.9"*0.5"(200mm*12mm) |
|
Punching max(Thickness): |
0.5"(12mm) |
|
Flat/vertical
bending width: |
1.6"*2"*2.4"*3"*4"*5"(40,50,60,80,100,125mm) |
|
Flat/vertical
bending
thickness: |
0.24"*0.3"*0.4"*0.5"(6,8,10,12.5mm) |
|
Flat/vertical bending busbar angle: |
0°-90° |
|
Throat depth of punching: |
4.3"(110mm) |
|
Punching dies: |
3/8", 5/8", 1/2", 3/4" |
|
Hydraulic pump pressure max: |
700bar(10152psi) |
|
Tank capacity of hydraulic pump: |
2.11gal(8L) |
|
Flow rate of hydraulic pump: |
0.7L/min-5L/min |
| knurling
stroke: |
(30mm) |
| Crimping
range of knurling: |
Copper-aluminium
bar≤5.9"x4.9"(150mmx125mm) |
| Crimping
type of knurling: |
One side |
| Package size: |
48.03"*32.68"*55.51" (122cm*83cm*141cm) |
| Net weight/Gross weight: |
573.2LB(260kg)/674.6LB(306kg) |
 |
c. Pressure
Gauge
Shockproof pressure gauge, reliable and durable, easy to
repair and replace, high accuracy, can clearly observe the
pressure changes of electric hydraulic pump.
|
d. Punching
Tool
Split punching tool, using high strength alloy steel C-type
working head, suitable for low carbon steel, copper plate,
aluminum plate and other metal punching; Accurate punching
positioning, no burr.
|
 |
 |
e. Cutting
Tool
Split cutting tool, cutting force up to 35 tons, cutting
thickness up to 0.5"(12mm); After cutting, the incision is
flat without deformation, and the positioning screw can be
adjusted to prevent warping when cutting.
|
f. Flat
Bending & Vertical Bending
With two functions of flat bending and vertical bending, the
strength can reach 35 tons; Give a variety of different
sizes of molds, can be selected according to the needs of
the appropriate mold, a wider range of application.
|
 |
 |
g. Knurling
Tool
It is suitable for knurling the connection of copper and
aluminum busbars to enhance the conductivity. No deformation
and no burr after knurling. The plug-in structure is adopted
to ensure the force uniformity of the copper and aluminum
bars. Equipped with 3/8 connector and dust-proof cap, it can
be connected to various pressure hydraulic pumps.
|
h. Hydraulic
Pump
Single-loop electric hydraulic pump, the maximum working
pressure can reach 700bar, built-in safety valve for
overload protection, two-stage hydraulic design, improve
work efficiency.
|
 |
 |
i. Foot Switch
The machine is equipped with a movable foot switch, freeing
the hands, easy and comfortable to operate, which can
greatly improve the work efficiency, save worry and effort.
|
j. Universal
Wheel
Equipped with four universal mobile casters, which can be
locked and fixed, casters are made of wear-resistant rubber
material, flexible and convenient to move.
|
 |
Features:
- The working table is polished
by mirror, grinding and chrome plating, rust resistance,
abrasion resistance and collision resistance.
- No deformation and no burr after punching and knurling; The
cutting surface is smooth without indentation and burr, one
bending molding, high precision.
- Electric 700bar hydraulic system, can provide enough pressure;
Low noise.
- The 1000kg/cm² oil-filled hydraulic gauge allows the operator
to perform machining operations according to the pressure index,
avoiding overload damage to equipment.
- Pure copper core motor to ensure long-term stable operation of
equipment; High quality, high sealing rubber pipeline to ensure
that the loop will not leak hydraulic oil.
|
