 |
a.
Powerful Motor
Equipped with a 3kW 100%
pure copper motor, strong power, high efficiency, simple
structure, able to work stably for a long time, high
reliability, low maintenance cost, low energy consumption, low noise, durable, good heat dissipation.
|
b. Foot
Pedal
The heavy-duty rebar
cutter comes with a standard foot pedal control switch
for hands-free cutting, 1-2 seconds cut
off, which can greatly improve the
work efficiency and save worry and effort.
|
 |
 |
c. Easy to Use
and Transport
Equipped with four iron wheels ,which make you to move the cutter
smoothly and easily to where you need. Two hanging rings and
one handle on the top make it easy to lift it up and
transport.
|
d. Air Switch
The rebar cutter has no plug, and is directly connected to
the air switch, more convenient, does not require constant maintenance, and has
a long service life. At the same time, it comes with an air
switch, that is, an open circuit protector, safe and
reliable.
|
 |
 |
e. Clutch
Lever
Clutch is also a key technology when using the steel bar
cutting machine, which realizes the purpose of cutting steel
bar by combining and disconnecting the transmission device.
It is characterized by smooth clutching, good viscosity,
strong bearing capacity, small volume, compact structure,
rarely maintenance, prolonged service life of the equipment
and good heat dissipation.
|
f. Blade
High quality forged head frame and blade, the blade is made
of high-quality steel material, ultra-sharp, high cutting
precision, strong and wear-resistant, efficient and fast
cutting in 1-2 seconds.
|
 |
 |
g. Feed Roller
It's used to transport rebar, and has the characteristics of
high efficiency, durable and reliable, thus improving
the work efficiency and production quality of the whole
steel bar cutting machine. Kindly reminder that be careful
of your hands when using it!!!
|
| The Control
Principle of the Clutch Switch |
|
The control principle of the
clutch switch is to control the opening and closing of the
clutch through the circuit, the specific steps are as follows:
1. Push the joystick forward
When the joystick is pushed forward, the circuit opens,
transmitting the current to the clutch. The clutch starts to
disengage and the cutting machine starts to work.
2. Pull the joystick back
When the lever is pulled back, the circuit is disconnected, the
clutch is reconnected, and the cutting machine stops working.
|
