| Product
model: |
12 place |
| Voltage: |
110V |
| Power: |
600W |
| Number of
samples processed: |
12 |
| Test tube
size: |
Ф 0.59"(15mm) |
| Nitrogen
consumption: |
330 ml/min / Sample
(adjustable) |
| Gas flow
indicator: |
0－15L/min |
| Standard
number of heating blocks: |
One test tube rack |
| Temperature
control accuracy: |
±1℃ |
| Temperature
control range: |
Room temperature-100℃ |
| Temperature
control mode: |
Digital display control
temperature |
| Package size: |
16.1"*16.1"*11.8" (41cm*41cm*30cm) |
| Net weight/Gross weight: |
13.6lbs(6.15kg)/15.8lbs(7.17kg) |
 |
c.
Drain Pipe
The drain pipe is designed to collect and discharge the
condensate generated during the experiment to prevent it
from interfering with the experiment. In addition, it can
avoid direct discharge of waste water into the laboratory
environment, reduce pollution to the environment, and also
protect the laboratory.
|
d.
Valve Switch
Each of the 12 nitrogen valve switches can be controlled
individually, and each needle can blow nitrogen separately
for safety and no waste of gas.
|
 |
 |
e.
Heating tube
The heating tube design makes
the heating process more uniform, and can control the
temperature well, avoid the local overheating phenomenon
that may be caused by direct heating, and ensure the uniform
heating and protection of the sample, suitable for a variety
of laboratory operations requiring precise temperature
control.
|
f.
Premium Quality
There is a detachable partition plate above the heating
tube, to separates the heating tube from the sample so that
the sample can be placed on it. The parts that may contact
with the solvent are made of stainless steel material, alloy
aluminum and plastic spraying surface, long service life and
easy to clean.
|
 |
 |
g.
Tube for Connecting Nitrogen Cylinder
The main function of the pipe connected to the nitrogen
bottle of the Termovap Nitrogen Sample Concentrator is to
use the strong purging effect of nitrogen to purge the
solvent in the sample solution, so as to achieve the
concentration and purification of the sample.
|
-
Each air needle channel in the distribution room can be used in
combination or separately, and each air needle can be switched
on and off separately. The height of the distribution room can
be adjusted as required.
- Each gas flow rate can be adjusted separately to meet the
different needs of users. At the same time, it overcomes the
weakness of different gas flow rate of the non-adjustable
nitrogen blower.
- The water bath nitrogen blowing instrument has a unique
self-balance suspension lifting system, clever design, so that
the height adjustment of the distribution room is more flexible,
truly achieve one-hand operation.
- Digital temperature controller, double digital display.
- The parts that may contact with the solvent are made of
stainless steel material, alloy aluminum and plastic spraying
surface, long service life and easy to clean.
- The whole machine can be put into the fume hood for use.
- Each model can be optional gas flow meter.
- The general standard heating block specification is the pore
size of 15mm, and users with special specifications can book
their special pore size and form in advance.
|
