220V 3PH Bottom Discharge Type Lab Industrial Centrifuge Machine Dehydrating Biomass Oil Extraction Solid-Liquid Separator
Product Overview
The industrial centrifuge machine is made of stainless steel, resistant to corrosion and rust; Reasonable design, strong power, fast speed; Step on the foot switch to complete the unloading, more time and labor saving. In industry, it is suitable for grinding, cutting and oil washing of various metal parts. Dehydration and degreasing of small hardware, electronic parts, iron filings, aluminum filings, copper filings. Cannot be used to dry clothes.
Product Parameters
Voltage: AC220V
Power: 4HP (3KW)
Phase number: Three
Max capacity: 110LB (50kg)
Rotating hub diameter: 22.8" (580mm)
Rotating hub height: 11.8" (300mm)
Drum rotary speed: 660 r/min
Halftone thickness: 0.12" (3mm)
Filter hole diameter: 0.24" (6mm)
Rated current: 13.6A
Motor speed: 1745rpm
Barrel material: Stainless steel
Scope of application: Suitable for hardware parts (such as screws, nuts, etc.); Cannot be used to dry clothes.
Package size: 43"*40"*52" (109cm*101cm*132cm)
Net weight/Gross weight: 1173LB(532kg) / 1295LB(587kg)
Note: This machine comes with a four-pin plug, if you want to use wiring, please connect three fire wires.
Product Features & Advantages

1.Motor:

3KW high-power three-phase asynchronous motor, made of pure copper core, high operating pure copper core, high operating efficiency, low heat generation, long-term operation, strong and durable.

2.Drainage Hole:

The bottom is designed with large-diameter drainage holes, which can timely discharge excess water or oil generated during work, and achieve better dehydration and deoiling effect.

3. Belt Transmission:

Transmission device adopts two triangular belts transmission design, belt strong and durable, fast speed rise, stable operation without jitter, high transmission efficiency.

4.Brake Lever:

Humanized manual brake lever design, when the equipment will continue to rotate due to inertia after power failure, the brake lever can be used to quickly slow down the equipment to stop rotating.
5. Filter Hole:

High density filter hole design, filter hole diameter is only 0.24 inches, can greatly improve the dehydration rate, can play a good water washing effect, will not damage the material.

6. Selected Material:

The machine adopts stainless steel body and inner liner, which is not easy to rust, corrosion resistance and long service life.

　

7. Discharge Port:

There is a discharge port design on the side of the machine. After dehydration is completed, the material can flow out from the discharge port on the side without effort.

8. Discharge Pedal:

There is a discharge pedal at the bottom of the machine. After dehydration is complete, you only need to step on the foot switch to complete automatic discharge, saving time and effort.

9. Spring Damping:

The three support points are equipped with suspension spring damping, which can greatly reduce the amplitude generated during operation and ensure smooth operation.
- The machine base is made of cast iron, with heavy weight, low center of gravity, stable operation and not easy to shake.

- Equipped with a centrifugal starting flange, the machine can be started slowly, and its braking efficiency is high, which can quickly stop the drum.

- The main shaft is made of high-quality steel, equipped with two bearings, and the lower end is supported by a thrust ball bearing to reduce wear and save power.

-The structure is simple, the processing efficiency is high, the noise is low, and the use is simple and convenient.

- If you need a larger capacity, please contact us, the maximum capacity we can provide is 485 lbs (220kg).
Product Presentation & Details
　
Item Included(056830)
Centrifuge Machine *1 Fixing Screw *3 Filter Bag *1 English Manual *1

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.