MP-3000E Professional Vertical Vibration Test Bench

(0-400Hz Adjustable Frequency)
Product Overview
MP-3000E intelligent vibration testing machine is used to simulate the various environments encountered in the manufacturing, assembly, transportation and use of the execution stage, to identify whether the product is able to withstand environmental vibration, suitable for the research, development, quality control and manufacturing of electronics, mechanical and electrical, optoelectronics, motor vehicles, toys and other industries.
The test method of the machine is based on the digital control of random vibration, and the vibration of various environments is simulated and provided to determine the ability of the test sample to withstand the specified broadband random vibration.
Product Parameters
Voltage: 110V/60Hz
Power: 1.2KW
Rated test load weight: 66lbs(30kg)
Vibration frequency range: 1~400hz
(Fixed frequency or sweep frequency can be set arbitrarily)
No load vibration amplitude: P～P/3mm
Vibration direction: Vertical/(Y)
Service environment: 0-40℃ RH＜80%
Working table size: 15.5"*14.2"(39.5CM*36CM)
Product size: 18.7"*15.7"*11.2"(47.5CM*40CM*28.5CM)
Package size: 20"*19"*14.6"(50CM*48CM*37CM)
Net weight/Gross weight: 77lbs(35kg)/86lbs(39kg)
20 different vibration parameters can be set, the test time can be set arbitrarily (0~999 minutes), the number of cycles can be set arbitrarily (1~200 times), and the number of tests can be added up.
Product Features & Advantages
1. Intelligent control :

Built-in overload protection fuse, and equipped with high-performance chip, read data more accurately. The microcomputer protection circuit is adopted to overcome the defect that the ordinary machine is burned by the impulse voltage when starting up, and the use is more convenient and reliable.
2. Power off automatic memory :

Automatic setting, simple operation, the use of advanced microcomputer control circuit, you can permanently memory set parameters, power will not lose data; At the same time, the number of vibration program segments and the number of program cycles can be set. When the machine completes the vibration test stop or the machine is shut down and powered off, the machine will automatically remember the current vibration data and automatically reset.
3. Thermal design :

The body has a heat dissipation window, timely heat dissipation, discharge the excess heat inside the machine, to ensure the long-term stable operation of the machine.
4. Adjustable amplitude :

Through the amplitude adjustment knob, the amplitude can be adjusted at any time according to the demand, simple and convenient operation.
5. Non-slip and waterproof :

Rubber support pad at the bottom, anti-slip and wear-resistant, play a good cushioning role; At the same time, the bottom of the machine can be isolated from the desktop to prevent the machine from water.
6. Handle design :

There are handles on both sides to facilitate the handling and moving of the machine, and the machine can be moved to the place where it needs to work at any time, saving worry and effort and making it safer.
Operation Procedure

Operation Procedure

※ Place the tested product in the center of the operating table and fix it reliably on the table, otherwise the vibration force is unbalanced, affecting the test effect!

※ Before starting, be sure to turn the amplitude knob counterclockwise to the minimum (Min), and adjust it to the required amplitude according to the test requirements of the product under test after starting. No load can be greater than 3mm(i.e. ±1.5mm). Otherwise, the performance of the machine will be affected and the noise will increase accordingly.

※ After setting the test parameters, press [Start] button to start the machine to work.

※ If the vibration needs to be paused in the middle of the test run, press [pause] to pause and press again to resume the vibration.

※ In the stopped state: press the [Start] key for 2 seconds to start vibration; Press the [Stop] key to terminate the vibration.

※ Turn on the timing function, the test will automatically stop when it reaches the preset time, and the interface will display "test complete" and sound prompt. Press the [Confirm] key or automatically close the prompt sound after 5 seconds and return to the initial operation setting interface.

Note: Due to the weight of the device, it is recommended to keep the original packing case for easy handling.
Product Presentation & Details
　
Item Included(056841)
MP-3000E Intelligent Vibration Testing Machine *1

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.