SET: Press once to enter the work time setting, then press save and exit

　

MOVE: After entering the working time setting, press once to switch the time to be set

　

ADD&UNIT: During the work time setting, this button is used to adjust the value. In standby mode, this button switches the decimal point unit.(Work time: The sensor senses the object and transmits the stop running time, which is generally recommended to be the same as the filling time)

COUNTER: Number of runs

SENSOR SWITCH: Press the sensor to work, turn off to stop working

POWER SWITCH: Press and turn on the controller

SENSOR: Support three-wire NPN sensor.
Brown: positive electrode
Black: signal
Blue: negative electrode

　

CONVEYOR: Support 12V power supply conveyor belt

POWER: 12-15V DC power input

CONTROL: Connection of third-party filling machines with footswitch interface

Stainless Steel Body:

● Water-proof

● Flat
● Cost-saving
　

　

　

PVC Conveyor Belt:

● Durable

● Corrosion-resistant

● Easy to clean
　

Double Guardrail:

The double guardrail on both sides of the conveyor belt can play a role in stabilizing the material, avoiding the material slip and deviation, and ensuring that the material can be stably transported to the destination. At the same time, it effectively prevents workers from putting their hands into the equipment accidentally, which may cause injuries.

Optical fiber sensor:

Equipped with optical fiber probe, with filling liquid positioning function, simple operation, precise control, DC power supply, safe and efficient.

A. DC low voltage control mode,
It is generally used in filling machines with universal controllers. This foot switch has the following two conditions:
a. Step down do not loosen, filling machine only fill once,

b. step down do not loosen, filling machine continuous filling.

B. AC high pressure control mode, generally used in pneumatic piston filling machine, which requires an additional DC controlled AC contactor to complete compatibility

C. Pneumatic control mode, generally used in pneumatic filling machine
This kind of foot switch is to control the pressure valve to make the filling machine work, and another pneumatic solenoid valve is needed to replace the foot switch control.

This controller slave foot pedal can provide three signals
A. The relay is continuously closed during working hours
    When the foot switch is pressed, the filling machine is only filled once.

B. During the working time, the relay is closed for about 0.5 seconds and disconnected
    It is suitable for the filling machine that does not loosen the continuous filling when the foot switch is stepped on.

C. During the work time, the output DC voltage is 12V and disconnected for about 0.5 seconds
    Suitable for pneumatic filling machine,
    AC foot switch requires a 12V DC AC contactor (self-provided)
    Pneumatic foot switch needs to add a 12V DC pneumatic solenoid valve (self-provided)

- Supports linkage with devices with foot switches
- Foot switchgear that supports wiring
- Pedal switchgear to support the pipe (need to add a DC12V pneumatic solenoid valve)
- The sensor delay time effectively solves the problem of multiple induction filling in the same bottle
- Counter function, cumulative number of work
- Support filling machine, particle separator, laser engraving machine, capping machine, etc
- Support pneumatic lifting control
- Support DC12V conveyor belt linkage
- Support induction filling
- Support automatic mode
- Support automatic feed mode
- Support automatic counting function, to the specified number, the conveyor belt stop intermittently
- Support automatic cycle operation mode

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.