| 110V Aquarium Chiller Hydroponic Water Chiller Fish Tank Cooler 79gal 300L |
 |
| Product Overview |
| Aquarium chiller is a kind of constant temperature equipment specially designed and manufactured for aquarium family ornamental fish farms and other places. This chiller can be used for a variety of purposes, fresh water/sea water/seaweed can be used, beautiful, easy to operate, is an essential equipment for fish lovers. |
| Product Parameters |
| Model: | AL-300L |
| Voltage: | AC110V |
| Power: | 600W |
| Cooling capacity: | 1/3HP |
| Rated current: | 1.6A |
| Refrigerant: | R134a |
| Water type: | All water types |
| Evaporator: | Titanium coil(Corrosion resistant) |
| Inlet and outlet specifications: | Inner diameter 12mm water pipe or 6 points outer wire |
| Cooling water volume: | ≤79.2gal(300L) |
| Noise: | 40DB |
| Water temperature setting range: | 18-26℃(64-79℉) |
| Net weight/Gross weight: | 30.9LB(14kg)/33.1LB(15kg) |
| Warning |
| - When you receive the machine, you
need to take it out and leave it for 3 hours before using
it.When you first use this machine, run it in the clean water
tank for two to three hours to clean the inside. - Do not place the machine next to electrical products such as televisions and speakers to prevent interference with the machine. - The ambient temperature (room temperature) of the machine shall not exceed 36℃! Excessive room temperature may cause safety hazards! - Do not block vents and do not place foreign objects near vents; Do not turn this product upside down when using. |
| Product Features & Advantages |
 |
Pure Copper Pipe The refrigerant transmission channel adopts pure copper tube, which has good thermal conductivity and can play a good effect of rapid cooling, and the good corrosion resistance of the copper tube ensures the long-term use of the equipment. |
|
Portable Design The left and right sides of the machine are designed with concave grooves for easy handling, which is convenient for stable and safe handling of mobile equipment, saving worry and effort. |
 |
 |
Support Pad There are four rubber support pads at the bottom of the machine, which are anti-slip, wear-resistant and corrosion-resistant, and can play a good stable support and cushioning to prevent sliding and falling.
|
|
Heat Emission Hole The back of the machine is designed with two heat emission holes, and is equipped with two fans, which can quickly achieve the effect of ventilation and cooling, and ensure the cooling effect and service life of the machine. |
 |
| - Powerful water cooler with
circulation systems that keep the temperature within a certain
range to give your fish、aquatic plant and coral reef a suitable
temperature to survive. - Good serenity, the noise of the chiller is only about 40 decibels during operation, which will not disturb the rest of most people (except those who are sensitive to sound). - High efficiency freon-free compressor, using non-polluting R134A refrigerant, no need to replenish refrigerant later. - Suitable for a wide range of scenarios, fish tanks at home, aquariums, and ornamental fish tanks in hotel lobbies and other places; Whether it is ornamental fish, newts or coral reefs, this chiller can use. - The built-in anticorrosive titanium tube ensures that the chiller can be used in both fresh and sea water and is more durable. |
| Product Presentation & Details |
 |
 |
 |
 |
 |
 |
| Item Included(056915) |
| Water Chiller *1 | Lathedog *2 | Sheet Gasket *2 | Power Cord *1 |
|
You can
make order with no worry. |