|
220V 0-1000℃ Automatic Low Temperature Electric Kiln Ceramic Oven Porcelain Figure Oven |
 |
| Product Overview |
| Low temperature electric kiln can be used for quick drying, blank firing, glaze color processing, low temperature glaze works, flower baking, ceramic repair and so on. The use of high-grade silicon molybdenum furnace wire and polycrystalline thermal insulation cotton, with fire safety, long service life; The low-temperature glaze effect after firing is the same as the real ceramic surface; Light weight, small size, easy to handle. |
| Product Parameters |
| Voltage: | AC220V |
| Power: | 1500W |
| Panel Material: | Steel Plate |
| Heating component: | Silicon-Molybdenum electric furnace heating wire |
| Insulation: | Polycrystal cotton insulation |
| Burning temperature: | 0-1000 degrees |
| Package size: | 28"*16.5"*16.5" (71CM*42CM*42CM) |
| Net weight/Gross weight: | 27.5LB(12.5KG) / 30LB(13.7KG) |
| Product Features & Advantages |
| 1. Fast firing: The
firing speed is fast, which greatly saves time, and can also
quickly dry the works; 0-1000 degrees heating, 1-2 hours to
complete. 2. Low temperature glaze firing: Firing products bright color; The effect of low temperature glaze after firing is the same as the effect of real ceramic surface. 3. Glaze color processing: Any ceramic can be painted on its own pattern firing, firing the pattern can be permanently preserved. 4. Clay firing: The clay can be quickly fired into a solid, with waterproof, breathable. 5. Intelligent control: Intelligent operation can be achieved through the operation panel, and the operation is simple. 6. High quality material: The use of high-grade silicon molybdenum furnace wire, can be fired 1000 degrees, long service life. The use of polycrystalline insulation cotton, with fire safety, good insulation effect, can improve heating efficiency, save power. 7. Lock: There are two lock design, can support the kiln door, to achieve rapid cooling. |
| Operation Steps |
| 1. Plug the power plug into
the power supply. 2. Adjust the digital button to the desired burning temperature. 3. Press the red switch button to start firing. 4. Automatically stop when the firing temperature reaches the set temperature. Note: Due to the fast heating speed of the kiln, the work is too wet or too thick and easy to crack. It is recommended to open the kiln door 20cm before 400 degrees and close it after 400 degrees. |
| Product Presentation & Details |
 |
 |
| Item Included(056952) |
| Low temperature electric kiln *1 |
|
You can
make order with no worry. |