 |
c. Alarm
In automatic mode, the machine will beep after the bobbins
in the tray are completely wound. When the screen displays
"No bobbins please check", please place empty bobbins into
the tray. You can also set the number of bobbins in the
setup page, when the machine reaches the set value, it stops
and beeps too.
|
d. Control
Panel
The control panel includes six functions of Maunal,
Auto/Stop, Set Up, Upturn, Lighting, and Downturn. You can
set the winding time and number of bobbins, which are
easy to operate and easy to understand. The work efficiency
is high, the count is accurate, the noise is low.
|
 |
 |
e.
Outlet Port
The finished product will come out through the outlet port,
which adopts slope design, will not be stuck, and has a
certain height from the bottom of the machine, which is easy
to collect and process the finished product and improve the
processing efficiency.
|
f. Efficient
Cooling System
On the left of the machine is designed with a large heat
emission hole, which can discharge the heat generated by the
winder in time to ensure the long-term stable operation of
it, with higher efficiency and longer life.
|
 |
 |
g. Supporting
Legs
Four rubber support legs at the bottom, which are non-slip,
wear-resistant, good silence, can ensure the stability of
the winder, and can prevent water from entering the machine
from the bottom.
|
a. Put empty bobbins to be wound into the tray.
b. Press the Manual button.
c. After the spindle turns to the clamping position and stops
place the thread that has passed thread stand on the center
shaft of driven gear.
d. Pass the thread through the edge of scissors.
e. Press the Automatic button and the machine enters a full
automatic mode.
f. Press the Automatic button again and the machine stops
Note: After the bobbins
fall in the slide the machine starts up automatically the
machine starts to wind only when at least three bobbins are
placed. When bobbins are placed into the hopper ensure that the
thread at the bottom of bobbins has been cleaned up. Otherwise
the bobbins may fail to fall into the slide. Do not place any
sundries in the hopper. |
|