3 / 4 / 6 / 8 Inch Two-claw Puller Separate Lifting Device Multipurpose Pull Strengthen Bearing Rama for Auto Mechanic Hand Tool
Material: Carbon steel
Color: See Picture
3 Inch
Claw Length: About 75mm(3 inch).
Application: Most bearings, car repairs.
Product Weight : 238 G / 8.40 Ounces
Product Dimensions (L*W*H) : 110*83*30 MM / 4.33*3.27*1.18 Inches
4 Inch
Claw Length: About 100mm(4 inch).
Application: Most bearings, car repairs.
Product Weight : 320 G / 11.29 Ounces
Product Dimensions (L*W*H) : 125*84*30 MM / 4.92*3.31*1.18 Inches
6 Inch
Screw Length: 155mm
Crossbar Length: 105mm
The Entire Length of The Claw: 130mm
Below The Crossbar Length: 50mm
8Inch
Screw Length: 176mm
Crossbar Length: 120mm
The Entire Length of The Claw: 155mm
Below The Crossbar Length: 65mm
Application: Most bearings, car repairs.
Features:
- Made of high-carbon steel, has been used to make difficult to produce steel.
- Can be rotated from the center of Rama, will soon be able to touch the work center was pulled.
- The crossbar is removable and a socket wrench can be used, easy to use.
- Ultra-thin hooks, ultra-high strength, not easy to pull bad.
