Submersible Water Level Transducer Sensor

0-5mH2O 6m Cable (110022)

Description

Technical Parameters:

Measurement Range	0-5mH2O/50kPa
Cable Length	We will offer 6 meters in order to make sure the enough length
Measurement Medium	Water or oil
Power Supply	12-32VDC
Output Signal	4-20mA
Accuracy	±0.5%FS
Overload Capacity	Two times full-scale pressure
Using Temperature	0c—70c
Compensation Temperature Range	0c—60c
ZTC: (typical)	±0.02%FS/c
STC: (typical)	±0.02%FS/c
Long-term Stability (typical)	±0.1%FS/year
Waterproof Class	IP68
Load Resistance	less than (U-10)/0.02Ω
Shell Material	316L stainless steel
Explosion-proof Type	Exia II CT6

Notice

1.Prevent from the surge voltage, over-voltage, over-current and the protection

of reversed polarity.

2.Do the test to make sure the ability of overload resistance and shock resistance, precisely

ensure the overload capacity.

3. Implement the electromagnetic interference resistance to avoid the problem taken place

under the condition of complicated electromagnetism environment.

4.All sensitive chips are from the imported OEM parts, in order to keep the long-term stability.

Caution:

1.The measurement medium should be compatible with stainless steel.

2.Don't connect the wires when the power is on,connect the power after checking the connection wires.

3.Shell and power should be connected with earth; don't change the welded parts and connected

wires of the outgoing products when customer use it.

4.Sensor is related to the precision device, don't disassemble, and what's more, don't touch the

diaphragm, in case of break.

5.To avoid being submerged, please add waterproof box in the outdoors and don’t block the vent

6.You can pull the line into a semi-circular and make the vent down.

What in the package :

Part description	Quantity	Part image
Submersible Water Level Transducer Sensor 6m Cable	1pc
User's manual	1 pc