Description:

This machine is not suitable for minors to use or food  processing.
This machine could transfer photos, words on cotton, fiber, metal, ceramic,  glass and so on, suitable for producing gift, advertisement and so on. Easy to  using.

Working Process

•T-shirt/Plain materials printing process:

① Place the material on working table, adjust  the pressure knob(3) get right pressure required.

② Connect power plug and  turn on power.

③ Set time & temp you want  with temp/time gauge (2) get required numbers.

④ The temp for heating plate (5) will start  to rise up, when it reaching temp you set, place the material on the working  table and close the handle (4).

⑤ The buzzer will sound when reaching time  you set, release the handle(4) and take out the material.

•Mug  printing process:

⑥ Clean  the mug surface, cut the image as per your design, printing size about height  9cm,length 20cm

⑦ Wrap  the mug with the cut image, Make the image in the central and make it symmetrical both sides: Stick the paper with thermal tape.

⑧ Put  the mug in the center of heating mat (7)

⑨ Adjust  the pressure for printing mugs, not too tight, or too loose and

close the  handle (6).

⑩ Turn  on power adjust the time/temp gauge (3) time 200S-300S, temp about  180℃-200℃.

⑪ The  machine will sound an alarm automatically when reaching time,  turn  off power , take out the mug from the heating mat (7)

⑫ Peal  off the paper. Put the mug S L O W L Y into cool water, then see a  photo mug is well done by yourself!