Auto-Open sublimation Cap Heat Press machine #110064


Description
Designed for printing textiles and other materials may be used on T-shirts, mouse pads, puzzles,
ceramic tiles, and other flat surfaces items by using the flex, flocking, transfer printing paper,
sublimation etc.
features:
1.The machine uses a two-in-one design, it not only can transfer small logo but also hat.
2.It is Magnetic semi-automatic, convenient and efficient
3.LCD temperature controllers display
4.The press is equipped with a manual override, a digital display, and a sound signal at the end of work.
parameter
Voltage	110V
power	1400W
package size	23.2323.2311.81inch
time	0-999S
Heating plate size	4" * 6" [9.5*15cm](hat pad)
	5"* 5" [12*12cm]flat)
weight	41.8LBS

using method :
1.set pressure
Adjust pressure at the top of the tray in a clockwise
direction to increase pressure and in the opposite
direction to decrease by turning the knob.
2.set temperature &time (Blue means temperature, white means time)
(1)Press on the on / off switch located on the side of the heat press to be energized.
(2)Press once on the "SET", screen show "SP" on the display. Press “▼”or “▲” to the desired temperature.

(3)Press once again on "SET", screen show "St" on the display. Press “▼”or “▲” to the desired time.

(4)Press “SET” for a few seconds after finish all setting to come out setting mode.
“ COUNTER “ means how many times you have pressed If you want to clean this number to zero, press
“RESSET” “▼” for a few seconds.
(5)Put objects when the machine has reached the desired temperature, close heating plates, waiting time.
(6)When times up, machine will open automatic, take out printing items.