110V Pneumatic Rosin Press 5000psi 6 x 8 Platen Dual Heating 110066
|
|
DESCRIPTION | |
This machine is not suitable for minors to use or food processing.
|
|
A heat press machine is the machine that presses a transfer onto an imprintable substrate. | |
Using high temperatures and pressures for a certain amount of time, the transfer is permanently | |
embedded into the product. | |
Heat presses are recommended for professional and satisfying results simply because standard | |
laminating devices and home hand irons can not get even near the temperatures required for a | |
reliable transfer. | |
|
Components: ① Temp/Time gauge ② Emergency-stop button ③ Start device ④ Regulator
|
specification | |
Voltage | 110V |
power | 550w |
Time Range | 0~999s |
Printing area | 15*20cm (6"*8") |
weight | 88lbs |
package size | about 19.69*13.39*23.62 inch |
Feature | |
1.The machine was used digital temperature control and owns high accuracy. | |
2.It owns electronic time control and the signal instructions when it completes the process. | |
3.It is easy to adjust the pressure. | |
4.The heating pipe and heating plate is overall and the heating time is short, safe and reliable. | |
5.The press of the
machine is pneumatic, making the operation more efficient and more powerful. |
|
Function: | |
1.Turn on power (2)and connect air compressor ,place the material on working table | |
2.Adjust the pressure with pressure adjust screw ,lift this screw up adjust pressure. | |
Clockwise for add pressure ,anticlockwise for decrease pressure (advise 0.3-0.6) | |
|
|
3.Set temp&time with temp/time gauge(2) | |
|
|
4.The temp for Heating plate(5) will start to rise up ,when it reaching temp you set ,place the
|
|
material on the working table. | |
5.Press Start device(4) the heating plate(5) will close. | |
6.The heating plate(5) will lift up automatic when reaching time you set ,then take out the | |
material. | |
7.Emergency-stop button when you met any emergency press this button ,machine will turn off | |
power. | |