Portable Plasma Flame CNC Cutting Machine Z Axis Torch Lifter Holder 100mm DC24V#110073

https://buyyou.net/cbe/data/prd/110/073/1-1.jpg
https://buyyou.net/cbe/data/prd/110/073/0-1.jpg
Description

 1. This flame/plasma cutting machine Z-axis torch lifter is driven by DC gear motor to lift the torch up &

down.
2. The most important part of the device, which is to keep the machine's cutting accuracy and to support
plasma arc positioning function, is equipped with NPN proximity switches.
3. This lifter's mechanical movement part is made of Taiwan TBI ballscrew, standard linear shaft (SFC) &
linear slider on the ends; torch clamper/holder is made of bearing steel, and fasterned by linear sliders,
which is to ensure the lifter movement's stability & verticality.

4. Convenient to install, work simple, improving the work efficiency.

Product introduction:
Working voltage: DC24V
Working stroke: 100mm
Dimensions: 12.60*3.15*2.36 inch
T-304 stainless steel screw
Includes jig (torch range 12mm-38mm)
 Lift inside a plasma arc positioning
Aluminum body, the upper and lower aluminum sheet thickness of 8mm, forming a processing center
Four-core plug
Weight: about 4.62lbs
Mounting Hole Size Length: center distance between left and right holes is 40mm
Air control plug definition
 
1 foot --D +; (motor positive)
2 feet --D -; (motor negative)
3 feet --Zero; (positioning normally open output)
 4 feet --COM; (positioning normally open output)
Note: Built-in limit (reverse diode)
https://buyyou.net/cbe/data/prd/110/073/5-1.jpg

https://buyyou.net/cbe/data/prd/110/073/6.jpg

https://buyyou.net/cbe/data/prd/110/073/7.jpg