0# Rotor for Rotary Viscometer Viscosity Meter Low Viscosity Adapter#110130 |
 |
| Description |
| 1: Designed for low viscosity measurement sample |
| 2: The sample volume requires only 25ml |
| 3: cylindral rotor can be accuray calculated shear rates so a detailed analysis of the product. |
 |
|
Adapt to |
|
1.Digital LCD Rotary Viscometer 1 ~2×10^6 mPa.s NDJ-8S |
|
2.Rotational Rotary Viscometer 1 ~1×10^5 mPa.s Fluidimeter NDJ-1 |
|
3.Digital Rotary Viscometer 1 ~2×10^6 mPa.s NDJ-4 |
| 4.Digital Display Rotary Viscometer Viscosimeter 1 ~1×10^5 mPa.s NDJ-5S |
| 5.Digital Display Rotary Viscometer 1 ~1×10^5 mPa.s SNB-1 |
|
6.Rotary Viscometer 10 ~1×10^5 mPa.s Digital Display NDJ-9S |
 |
| 0# Rotor That ultra-low viscosity adapter for accessories, use the following: |
| 1.Below15mpa.s Liquid selecon0No. rotor, use0No. rotor without protective frame, will0Number |
| rotor mounted on the attachment screw (counter-clockwise ). |
| 2.The fixed sleeve set into below of the air cylinder and tighten the sleeve screws. |
| 3.Outward tetube (bottom) poured into the20-25Ml of liquid to be measured. |
| 4.The outer tetube set into the fixed sleeve and be tighten with a tetube and fixing screws, |
| care mu be taken when tightening the cone of the end of the tetube fixing screw screwed into |
| the triangular groove in the outer upper end of the tetube (the side of the hole can be |
| observed Te tube triangular groove is located circular holes). It can be measured after the te to |
| control the temperature of the liquid. |
| 5.equipped with end external tetube, the bas method as above (except 3), when the outer |
| rotor immersed in the tetube and the outer tube with ring groove as a level line. |
 |