Brand New 60W CO2 Laser Engraving Machine Laser Tube
Power output(W)：60 Wavelength:10600nm Length（mm）：about 1250 Cooling System: Water Cooling. Triggering voltage(KV)：22 Operating voltage(KV)：16 Operating current(mA)：0-20 Outer diameter(mm)：55 Power stability: ±5% Water Cool Package including: 1x 60W laser tube
	You can't leave cooling water in laser tube after power off, it will freeze at Cold areas. Optimum working water temperature is 15-35 degrees. working lifetime up to 3000-4500 hours (According to the water temperature, continuous workload, the use of laser intensity and other aspects to determine) The Laser tube after generally work 3-4 hours should to pause for about 30 minutes. Low power can extend the life of the tube.
Installation Requirement Make sure to follow the operation instruction of model as shown in the illustration. The dedicated power should be equipped. The positive pole of laser tube is in high voltage (the ignition voltage is 22kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage.
Can be used for 60W laser machine

Recommends Accessories : 130094: Laser tube Holder 130058: Industrial Water Chiller CW5000 130114: Industrial Water Chiller CW3000 130022: 65W water pump 130021: 20W water pump 130056: 45W water pump Plastics & Rubber