Pipe Welding Machine Pipe Soldering Iron Plastic Hot Melt Tool
This product is suitable for hot melt socket
welding of thermoplastic pipe such as PPR/PE/PB.High quality design and
construction provides an
excellent machine for welding both on the worksite and in the factory.
The use of high quality Aluminum casting allows for lower weight without
compromising strength and performance.
1. Accurate temperature control, high safety index,
and strong environmental adaptability.
2. The heat transfer plate is made of aluminum alloy, with high thermal
conductivity and strong antioxidant energy.
3. The structure is sturdy, convenient and fast, and not easy to leak.
4. The hot melt mold head adopts non stick high-temperature coating technology, with a long service life.
5. Replacing the mold head can be used for connecting plastic pipes and fittings of various caliber sizes (specifications: φ 63-160mm).
| Model No. | 2.48-6.29”(63-160MM) |
| Materials | Aluminum alloy casting, 45# steel |
| Welding level(Φ) | 63mm(2.48”)、75mm(2.48”)、90
mm (3.54”)、 110 mm (4.33”)、160 mm (6.29”) |
| Docking deviation | ≤0.3mm |
| Power of Heater | 110V |
| Working temperature | 300℃ |
| Temperature deviation | ±5℃ |
| Environment temperature | -5℃-40℃ |
| Time required
to reach soldering temperature |
<20min |
| Materials can be welded | PE PPR PB PVDF |
| Weight | 117.7LB(53.5kg) |
| Package Size | 29.5*19.7*22.1"(75*50*56cm) |
 |
 |
|
Left and right division
of labor fixture The left side can fix the pipe, the right side can fix the pipe, and the middle can remove the heating plate, replacing manual welding. The welding effect is good, labor-saving and worry free. |
Card slot type retainer Firmly fix the pipe fittings to prevent them from falling off. |
 |
 |
|
Thickened high power
heating plate Aluminum heating plate for faster heat conduction and lighter weight. |
Adjustable top column With the front slot fixator, the pipe fittings are firmly supported, the position can be adjusted at will, and then locked. |
required pipe specifications, and tighten it with an internal hexagonal wrench. Generally, the small one is at the front end and the large one is at the
rear end.
2. Turn on the power and pay attention to the changes in the indicator light until the welding machine enters the working temperature control state
before starting operation.
3. Push vertically cut pipes and fittings into the fusion splicer die without rotation, and operate as required. After reaching the heating time,
immediately remove the pipe and fittings from the mold head and quickly and evenly insert them into the required depth without rotation, forming a
uniform flange at the joint.
On the Eccentricity Problem
1. If the top and bottom are not aligned, the pipe needs to be raised to the same level as the fixture.
2. If the left and right are eccentric, the screws on the pipe clamp can be loosened and the position can be adjusted according to actual needs.
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost.