Farm Home Straw And Fodder Crusher
This machine adopts chain automatic feeding and is suitable for cutting and kneading crops such as grass, corn stalks,
sorghum stalks, wheat straw, rice straw, straw, etc. The cutting and kneading process can be adjusted in length. The hard
stem nodes on the surface of the straw are destroyed through the cutting and kneading process, and the processed feed
becomes soft and filamentous without hard nodes. This improves the taste of livestock and poultry ingredients such as cows,
sheep, chickens, pigs, geese, rabbits, and improves the feed utilization efficiency of livestock and poultry, It is a necessary
straw kneading mechanical equipment for farmers and small and medium-sized feed processing factories.
| Voltage： | 220V |
| Power: | 3KW |
| Capacity: | Crush：500kg/h |
| Cutting Grass:2-3.8T/h | |
| The Knife: | 6-Blade+Serrated Knife |
| Applicable : | Farms Home |
operation, improves working
environment.
adjusted to adjust the discharge
size as required.
working diameter is larger, the
wind is larger.
chain, automatic feeding, safe and
efficient, dry and wet dual use.
provided with a splash damper
pulverized, fast and fine.
9CrSi hardness: HRC55 degrees,
easy to cut, high efficiency.
speed at any time.
automatic feeding, convenient
and fast.
1.Before using this machine, it is necessary to conduct a comprehensive inspection and adjustment to ensure that all
connections are secure and reliable, and all rotating parts must be filled with lubricating oil.
2.Before starting the motor, jog it first to check for any abnormal collision sounds. At the same time, observe whether the rotor
direction is consistent with the arrow direction marked on the body. Then, start the machine and idle for 5-10 minutes, and
wait until everything is normal before feeding and working normally.
3.Apply lubricating grease evenly to the rotating gears and transmission chain wheels every 12 hours of operation, and apply
grease to each operating part of the machine every 24 hours of operation.
4.When the work is about to stop, the machine should idle for 3-5 minutes to remove any remaining materials from the body.
After cleaning the machine, lubricate and maintain all rotating parts.
Single-phase motor current is relatively large, 3 kw motor
please use more than 4 square copper wire, wiring must be
firm, it is recommended to use 63 Ann air switch, please do
not use ordinary plug socket, so as not to current enough to
lead to capacitor or motor burn out! (Please strictly follow
the above tips!)
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us
with low cost.