Hydraulic Copper Busbar Bender
　

http://topseller365.com/data/prd/148/043/1.jpg

http://topseller365.com/data/prd/148/043/2.jpg

Instruction：
 1.Connect the tool joint pin with box joint, fasten up, When it is not used, you can screw the plastic dustproof set on the male connector, avoid dirt to enter.
2.Put the object into the bending machine,the center of the object is aligned with the center of the piston.
3.Close the oil return swith on the Pump, wrench the handle, make the press film closer to the object , then bend.
4.Loosen the oil return swith, the press film return automatical to seat.		 http://topseller365.com/data/prd/148/043/6.jpg
　
Specifications:

　

Model

Output

(T)

Breadth

(mm)

Max.Thickness

(mm)

Net Weight

(kg)

CB-200A

25

200

16

32
　

　

    

Details

http://topseller365.com/data/prd/148/043/7.jpg
Function：

1. Used for bending copper and aluminum bus bar.

2. Fast bendting speeding without scrapping, the big scrap is good for recycle. 

3. Bendting surface is smooth without distortion.

　
Item Included(148043)

1*Hydraulic Copper Busbar Bender