16 tons pneumatic manual operation integrated portable pipe bender
http://topseller365.com/data/prd/148/048/34.jpg
http://topseller365.com/data/prd/148/048/36.jpg
http://topseller365.com/data/prd/148/048/41.jpg

Product Introduction
This pipe bender is designed to bend water pipe, rigid conduit, heavy-gauge galvanized
pipeused in commercial applications, and other similar types of pipe. When bending thin-
walledpipe or conduit, fill the pipe with sand and cap the ends before bending.
Equipped with pneumatic hydraulic pump, directly connected to the air compressor to use,
can also rely on the handle manual operation.
http://topseller365.com/data/prd/148/047/38.jpg
http://topseller365.com/data/prd/148/047/39.jpg

Product parameter
Capacity 16T
Control Mode Pneumatic+Manual
Cylinder Stroke 250mm
Material Nodular cast iron
Die 1/2"，3/4"，1"，1-1/4”，1-1/2" ，2" ，2-1/2" ，3"
Net Weight 120lb(54.5kg)
Gross weight 152lb(69kg)
Package size 29.3*25.8*11.8in
(74.5*65.5*30cm)

　

 http://topseller365.com/data/prd/148/048/33.jpg
The outer diameter of the mold corresponds to the size and wall thickness
Die specification Die outside diameter Nominal diameter Minimum wall thickness
1/2" φ22 DN15 2.5mm
3/4" φ28 DN20 2.5mm
1" φ34 DN25 3mm
1-1/4” φ42 DN32 3mm
1-1/2" φ48 DN40 3.5mm
2" φ60 DN50 3.5mm
2-1/2" φ75.5 DN65 3.75mm
3" φ89 DN80 4mm
If there is no corresponding mold, you can choose a slightly larger mold size (such as 32MM optional 34MM).
You can check whether the wall thickness is suitable according to the corresponding mold size (the wall thickness
can be 0.5 or 0.5).
Detail
http://topseller365.com/data/prd/148/048/42.jpg           http://topseller365.com/data/prd/148/048/37.jpg
Pneumatic and manual hydraulic operation mode,
equipped with pneumatic hydraulic pump, directly
connected to the air compressor to use, can also
rely on the handle manual operation.		 A total of eight holes can be used to install rollers.
Change the hole positions and adjust the bending
angle as required.
     http://topseller365.com/data/prd/148/048/35.jpg http://topseller365.com/data/prd/148/048/40.jpg      
The handle has a groove, and when the work is
completed and the hydraulic cylinder returns to
the position, the pressure can be relieved by
rotating the pressure relief valve at the bottom of
the hydraulic cylinder with the handle.		 Mold installation column, easy to load and unload.
　
Item Number: 16 tons pneumatic manual operation integrated portable pipe bender 148048

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us
with low cost.