110v Automatic Wire Stripper Machine |
![]() |
Introduction This machine is suitable for
various types of wire, wire, silk, wrapped in aluminum. Size can be followed by
line and hole. Waste wire and cable capable of stripping diameter (2-20cm). |
![]() | |||||||||
Operation 1.Push the Switch up to turn the
Motor ON, Check whether the machine work well. Make sure There are no people on
the output side of the machine. Comparing the cables/wires’ diameters with the
feeding holes on the machine, feeding the cables/wires one piece at one time.
Before feeding the cables/wires, please cut off the head of the cables/wires, to
avoid gaps caused to the blades. | |||||||||
Parameters
| |||||||||
![]() | |||||||||
![]() | |||||||||
Blades adjuster A: (14mm)cores flat cables/wires feeding slots B: Diameter 1-3.5mm cables/wires’ feeding hole C: Diameter 3.5-5mm cables/wires’ feeding hole D: Diameter 5-9mm cables/wires’ feeding hole E: Diameter 9-13mm cables/wires’ feeding hole
| |||||||||
![]() | |||||||||
Note Make sure the cables/wires' diameter are similar with the feeding holes, large cables/wires in large feeding holes, small cables/wires in small feeding holes, flat Cables/wires in flat feeding holes.
| |||||||||
![]() | |||||||||
Item included:
| |||||||||
|