Automatic Saw Blade Grinding Machine 220V




Features
This machine is a fully automatic gear grinding machine designed according to the grinding of circular saw blades. parameterThe machine has the advantages of simple structure, convenient operation, complete functions, high efficiency and energy saving, low carbon environmental protection and accurate grinding.
Structure

1.grinding wheel drive motor 2.Pressure cylinder 3.Motor lifts handwheel 4.Work light 5.Round nuts with left and right teeth 6.Computer control box 7.Grinding wheel switch 8.Walking deck 9.Pitch adjusting screw 10.Cutting fluid pipe 11.Vertical shaft 12.Vertical shaft locking handle 13.The motor moves the handwheel left and right 14.Table hand-wheel 15.oil-water separator
Parameter
	Voltage	220V
	Blade size	100-600mm
	Pitch	5-45mm
	Working pressure	0.6Mpa
	Pulling speed	0-55/min
	Power	550W
	Speed of grinding wheel	2850r/min
	Grinding wheel specifications	1503210mm
	Tooth shape	left and right teeth, flat teeth, three left and one right, three right and one left
Maintenance
1.Equipment must be regularly maintenance in daily use,Effectively maintain the normal operation,The maximum service life. 2.Regularly check grinding wheel grinding wear and change in time,Use wear serious ground will increase the friction coefficient ,Damage to the grinding wheel motor spindle bearing ,And affect the saw blade tooth grinding precision. 3.End of each shift work should be clear in time chip or dust on the surface of the table ,Make sure don't jam the cutting fluid backflow. 4.Linear guide slider come on 1-3 times in each shift,Ensure the slider inside ball at work to get sufficient lubrication. 5.Oil-water separator must be loaded with special oil cylinder or 10# engine oil ,Periodically check the oil loss and add in time;After long time use cups will fill in the waste water,emissions should be regularly.
Display

Note
The machine needs to be connected to an air compressor, which needs to be provided by the customer themselves.
Item Number:153212

You can make order with no worry. Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays. Warranty: 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.