110V Desktop powder filling machine
The semi-automatic filling and packaging machine can automatically complete metering, filling, mixing, and other tasks. It is suitable for packing powder and granular materials that are easy to flow or have poor fluidity, such as milk powder, feed, Rice noodles, white sugar, coffee, monosodium glutamate, powder and granular additives, etc.
Note:
1.The desktop powder filling machine is not equipped with weighing mode (the display screen template shares a set of templates, although there is an option for weighing mode, it is not actually available on this machine.)
2.All weighing related functions in the machine cannot be implemented, and panel programming is a common set.
| Voltage: | 110V/60Hz |
|
Power: |
1.5KW |
| Material: | The surface is stainless steel |
|
Measurement method: |
weighing feedback tracking spiral rotation filling type |
|
Packaging weight: |
10-200g (If customers want to achieve different packaging ranges, they need to change the screw accessories and purchase them themselves.) |
|
Packaging accuracy: |
packaging weight ≤ 100g, deviation ≤ ± 0.5-1g |
| Product size(Exterior sizes): | 25.6"x19.68"x36.2" (65x50x92cm)(The highest height is adjustable) |
|
Packaging weight ≥ 100g, deviation ≤ ± 0.5-1% |
|
|
Packaging speed: |
15-30bags/min |
|
Bin volume: |
15L |
There are three filling modes:
Automatic mode (after being turned on, the next filling will continue after the completion of one filling)
Fine adjustment mode (slowly increase the weight, such as 200 grams. When filling to 190 grams, use fine adjustment, and the material will be slowly filled bit by bit)
Quantitative mode (after setting the filling weight, each filling weight will be equal)
Note:The desktop powder filling machine is not equipped with weighing mode (the display screen template shares a set of templates, although there is an option for weighing mode, it is not actually available on this machine.)
There are three options for mixing modes:
Mixing normally open: The mixing leaves in the hopper will continuously stir without stopping, including when not filling
Mixing followed by filling: the mixing function will only be automatically started during filling
Mixing normally off: turn off the mixing function
Note:
To use automatic mode, it is necessary to connect the supporting equipment conveyor belt, which cannot be achieved by a separate powder filling machine.
Touch screen man-machine interface: stable operation, anti-interference, convenient and intuitive operation.
This machine is equipped with a stirrer, which can achieve the mixing function and enable better filling of materials.
1. Feed inlet
2. Servo motor
3. Mixing motor
4. Display screen
5. Electrical box
6.Start switch
7.pilot lamp
8.Emergency stop switch
9. Machine base
10.Foot switch
11. Discharge nozzle
12. Motor base
13. Buckle
14.Visualization window
To ensure safe production, please carefully
read the following precautions:
1. Use a power supply that meets the requirements of this device, and
ensure that the voltage is stable.
2.After turning off the power switch, there is still voltage in the
electrical control circuit of this machine. When repairing the control
circuit, be sure to unplug the power cord.
3. Do not put your hands into the mixing bucket while working, and pay
attention to personal safety.
4.When there is a problem with the machine, directly press the emergency
stop button to stop all work.
Advantages:
1. The entire machine is made of stainless steel
and can be used for packaging various products.
2. Touch screen man-machine interface: stable operation,
anti-interference, convenient and intuitive operation.
3. The filling adopts a stepping motor moving screw, which has the
advantages of accurate positioning, high accuracy, fast speed, large
torque, long service life, adjustable rotational speed, and good
stability.
4. Mixing adopts high-quality motor: low noise, long service life.
5. High quality material box, clear movement and static of materials at
a glance, and no dust leakage.
6. The replacement of screw accessories can adapt to a variety of
materials, from superfine powder to large particles. (Our matching screw
can be used for 10-200g.This machine is equipped with a 26MM caliber
discharge screw as standard. If customers have other requirements, they
can consult us to purchase separately.)
You can make order
with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost.